Separate names with a comma.
Some features disabled for guests. Register Today.
It's not weak to lift the Z. The Z jogs up and down all day long. It's not wiring.
The wiring is the same as it was before and photo verified. The z jogs up and down and reports correct movement and can probe but wont home or...
How can I tell which grbl file is correct from the github page? I cant tell which one is the "we did this for you acro" version. That is not the...
Well why else would it not home or not move during repositioning? I click home and X and Y home properly. Z does not move. During jobs the Z will...
It must have come flashed with the acro 1.1f. It had never worked on any flash tool combo, had a chip replaced and was sent back as is and...
Resetting the controller allowed me to input the correct $$ values and now the machine works as it did. However it is still showing grbl 1.1f and...
I selected all the correct drop downs. No reason why I should need to upgrade controllers. This works for everyone else with a V3. My control box...
Controller not responding. Machine doesn't move even with updated $$ settings. Every upload now failed. What auto reset jumper? Getting really...
using this thread as reference Homing Cycle Issue - Z Axis doesn't home
Says failed. From the other post I need to flash a different version 1.1g then back to 1.1f
So my Z-axis was not homing and after searching I read to flash a different version .grbl then flash back to 1.1f regular version. It looks like I...
Sending it to Mike for an update! :thumbsup:
So the controller still connects to UGS both old and new versions and connects to Openbuilds Control. It still shows grbl0.9j and still has all...
Ok. I dont agree with the user error part as there are no instructions or indicators or information, other than this thread, about the chip...
