Beginner " P " Cnc Clamps

Software:

Illustrator / LaserWeb4

Machine Time:

12 min

Bit or Laser Size:

1/8" / 3.175mm mill end downcut

Feeds & Speeds:

15mm/s

Materials:

1/2" Plywood
1/4" screws
1/4" TNUT

Im working on a new project and it only make sense to get a new set of clamps. Now i usually clamp from the top or with double sided tape but there are a couple of projects down the road that will need some side pressure, thus the P Clamps.



So this is what you need to do:
- Place your stock material and secure it - I used double sided tape
- Load the included LaserWeb4 Workspace

or load the also included svg to your preferred CAM software
- Clean up if needed and add some color to it !!!!