Separate names with a comma.
Some features disabled for guests. Register Today.
That would be You do it from scratch (as its a different controller) but can borrow inspiration from the old values. Will need tweaking either...
Here's to hoping it will be the recommended one (: so we can either resolve or eliminate
No, double check what I said. Try with $33=1000.0 in Grbl Settings (not the VFD).
Did you try VFD Spindle Control via OpenBuilds BlackBox Controller and Software
And the Serial Terminal log does reflect the correct commands being sent?
Are you also adopting your test method to account for the higher value? (Sending M3S24000 instead of M3S1000) - if using the Menu in CONTROL -...
That much is fine - and handled with the VFDs Min Freq setting Your other issue of slightly skewed RPMs (not too abnormal, it is an analog...
One last thing before we make that call. - OpenBuildsCONTROL > Grbl Settings Tab - Click the Reset EEPROM button on the top toolbar - After its...
By looking at the Tool PWM LED (or hooking up an Oscilloscope) [ATTACH] The TOOL ON (ENABLED) LED comes on too - make sure you are looking at...
As you are playing around with the Tool On menu in CONTROL, does the PWM led on the front of the BlackBox go brighter and dimmer (brightest at...
You do have the 24v power in and on?
The problem is it seems like a custom machine, but you seem to have put in no work into customizing the Grbl Settings at all then? Start your...
I mean it should NOT be doing and Something is still fundamentally wrong in the first place. It should work CORRECTLY then you calibrate to...
No, that Macro is finding external features on a part. All the OpenBuilds probe features are covered by the built in wizard already:...
Run me down the list of things you did between it worked and now so we can see which was most likely?
Seeing as these go for an eye watering pricetag, what's the story behind the story on this? I mean, you didn't decide to skip our recommended...
Before calibration, the machine has to be correctly working first. Odd moves and "go crazy" sounds like you got some more work to do first. 1)...
Try with 1000
Please post a Grbl Settings backup for review. Might be PWM frequency or one of the other grblhal spindle parameters
Looks OK, but you'd need to use an oscilloscope to see if it droops on power up when the drivers enable. Being a DIN mount case it might not have...
