Separate names with a comma.
Some features disabled for guests. Register Today.
True (: but tip for next time. Add a "reference square" to your drawings. 100*100mm square, with words "this is a reference 100x100mm square. Use...
Is your machine calibrated? (CONTROL > Wizards and Tools menu > Calibration) Does the physical dimensions of their cut align with the drawing (if...
Yes it does The thing you want to do is stop the nasty 400hz VFD speweing EMI back into mains wiring (so filter on its power feed), Or get a...
Great!!! Its temp controlled so off means you arent overtaxing the PSU yet (>65degC)
Please continue the discussion with the store. Thanks
Please contact the Store via support.openbuilds.com > New ticket for assistance. The cables included are correct. Store support will help you...
Error says its still not a good clean CNC'able file. Post the file and I'll take a look for you - convert it to polylines for your for example...
Jpeg is about the worst format :) designed for compression over quality its a high loss format with lots ot artifacts. Looks for DXFs first, SVG...
Sounds like an Input file problem. What kind of CAD file are you loading? Properly prepared for CNC?
Connect to old controller > Backup Settings from CONTROL > Grbl Settings tab > Backup Settings button on the toolbar Plug in new controller >...
docs:powercase-v1.9:start [OpenBuilds Documentation] should fit the 12v too, if its screws are all in the same position as the 24v (suspect so,...
Depends if your controller has a way to access the UART pins docs:interface:connect-generic [OpenBuilds Documentation]
Disable Soft Limits initially. Needs good working homing first, so disable for now Switch issues = most likely wiring, but also make sure you get...
See docs.openbuilds.com/interface You will have to order a cable from Support > New Ticket Docs.openbuilds.com > interface > connecting to...
You reported the symptom that confirms you didn't copy the probe files to the USB using the wizard.... Yes, Step 3.3 :) But fix your probe...
Skipped section 3.3 of the Interface Documentation? docs:interface:prepare-usb-drive [OpenBuilds Documentation] Is the magnet solidly on the...
Crazy suggestion, but as the fight to fix the VFDs EMI seems insurmountable (for now) would you consider the easy way out? RoutER11 CNC Kit Is...
Easiest
Yes, Interface makes the machine standalone; see https://docs.openbuilds.com/interface to learn more about it
Yeah they are a little notorious, control it manually - don't wire it up to the BlackBox (or at least not if you want to use a warranty at some point)
