Separate names with a comma.
Some features disabled for guests. Register Today.
Nope it won't, go for it. But do take backups of important files so you don't ever need to worry
Don't use Minicom. Use OpenBuilds CONTROL from OpenBuilds Software: OpenBuilds CONTROL and OpenBuilds CAM
Ok thanks, contact the store
Will be the more likely issue
Or probe wired incorrectly shorting V+ to GND instead of SIG
Read through docs:blackbox-x32:currentadjustment [OpenBuilds Documentation]
Try it out and see. Tablets depending on make/model can sometimes be low spec
Old bug, but fixed for a while. Sure you are on V1.0.370?
Home and Additional or extended settings
It might be best to contact the vendor you purchased from for them to provide tech support.
Grab a CNC Electronics Bundle Full refresh is best, then you know it will all work together See https://docs.openbuilds.com/blackbox-x32 to...
Checkout video from around 9 mins in for Floating head setup [MEDIA]
With the cheaper Cast Corners Cast Corner Bracket, yes, if rotated 90deg off-axis -removing the bottom stubs are recommended Alternatively, use...
Negative use plain old NPNs. Sn04s or similar Or even better: Xtension Limit Switch Kit
At a guess (best to ask the VFD vendor of course, i don't know it, don't have one here nor is the manual at all clear) but perhaps Pn02 Value...
Contact the store via Support - new ticket
Extras. If you worked through the docs and nothing needed to be done with the jumper, put in a drawer. SD card is for if you someday want to play...
Duplicate post? Replied to questions above the repost Also, if that VFD doesnt have a min freq option, you might have to use VFD A2-8015 to BB x32
Forgot to setup the MIN FREQ parameter on VFD (only allow 7200 rpm plus for spindle's safety - does double duty as an OFF function) [ATTACH] 3...
Plesae contact the store via Support > new ticket for assistance, they will be able to resolve the issue for you.
