Separate names with a comma.
Some features disabled for guests. Register Today.
Checking brushes would be the first thing, though its a bit low on the hours. Are you running it quite aggressively? From our (and my personal...
Access Denied comes from your Operating System. Usually port shutdown due to conflicting applications, outdated drivers, bad hardware (usb hub or...
Thanks, will add the Pull Off distance to the calculation.
That looks correct, calculated move is less than available machine travel (G91 Y893.990 when you are at -894.99mm will end you up at -1mm - ie...
Front Left should be far-negative (Read through Frequently Asked Questions ) - axis maximas = 0. G54 is whereever it was last set. Re-established...
Neither of which is the more modern grblHAL grblHAL which is in use here No specific power up needed, if the WebUI isnt coming up its probably a...
Please provide a Grbl Settings backup for review Should be $23=3 so lets see if the Grbl Settings backup agrees
Will have to look into what the code does someday, if its critical
Would be less noticable with CONTROL as we send the Reset for you when you clear an error/alarm
Try a computer running CONTROL as a test, just to see if it makes a difference. We don't bother with the WebUI much (CONTROL has Telnet support so...
Check out the Wiring to Generic Controllers section of docs.openbuilds.com/xyzprobe docs:xyzprobe:wiringgeneric [OpenBuilds Documentation]
In grblHAL this is done with a simple recompile. Visit http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox%20X32 and set X instead of...
We'd prefer you confirm you did remove the clip yes. Insistently (: safety issue after all
Check out the Continuous Jog, otherwise use the Macros or Serial Console
Does it enumerate as a USB Serial device? We find devices using SerialPort.list serialport | Node SerialPort
Our official docs does not use the relays for the VFD. Some community writeups do, but properly configured, any VFD should only need 2-wire 0-10v...
Checkout the OpenBuilds BlackBox at https://docs.openbuilds.com/blackbox-x32
It is that accurate. Any deviation is mechanical. Which has hundreds of sources. Calibration, backlash, deflection, wheel adjustment, etc Jogs...
Then its as calibrated as you can do in Software. Rest boils down to how well the machine itself is set up. Tramming: A generic guideline amongst...
Did you Calibrate? Wizards and tools > Calibration menu in CONTROL: [MEDIA]
