Separate names with a comma.
Some features disabled for guests. Register Today.
No worries there. Just don't connect or disconnect any wiring WHILE its on (particularly motors) and don't create any short circuits
Remember to take (and email to yourself for example, or even welcome to upload it here on the forum, or PM to yourself - easy to find next time) a...
Ahh yes didn't even notice. 0 steps per mm is invalid Accidental edit/save? Firmware flash with erase settings option? Sent a $RST command?...
Does the onboard fan spin? (Quick check to see if you have working 24v supply)
Go to http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox X32 Setup custom options as needed (Eg setting Y to AutoSquared) [ATTACH]...
Thats the basis of all CNCs yes. MCO is set in stone. You have extensive reading time ahead... Learn about the CNC Coordinate Systems. Read the...
Soft Limits are not very beginner friendly, so ideally, turn it off. You need a good understanding of the section here Frequently Asked Questions...
Other thoughts: - Can't confirm or deny if its a blowback inverter from the pics. Take apart the nozzle and see if it has a movable / spring...
Yes, you don't have a Z axis, default config wants to Home Z first. Non existant Z motor never reaches Z switch so error is correct, it couldn't...
If its not there, post pictures of all your wiring. The reset could something like incorrectly wired plasma trigger, etc too - all wiring being...
Documentation: docs:blackbox-x32:connect-xtension-limit [OpenBuilds Documentation] and docs:xtensions:limits [OpenBuilds Documentation] Video:...
Unfortunately not one we are particularly knowledgable on, so you may want to refer back to the CAM vendor or their documentation. Or online...
Grbl by default is homing XY together. Not having a Y-axis is the reason for the alarm (it really didnt see Y triggering) Per your Grbl Settings...
What CAM application are you using? Most CAMs add it, some allow you to configure it per-toolpath, or in stock setup. More advanced CAMs use...
Your original thread title mentions wanting to do this in Vectric, but you have it modelled in Fusion now? Would you consider using Fusion's CAM...
Its just a test. But worth doing as the cause of the issue is unclear.
Sounds like EMI. See docs:blackbox-x32:faq-emi [OpenBuilds Documentation] 1) make sure Interface is up and running first (can jog machine around,...
Yes, as its analog it might be a little subject to noise, but its more a safety concern. The onboard controller doesn't seem to have an isolated...
Well, make sure of the facts - we can only help with the details you provide. Earlier you said Reliable information can help us help you zoom...
3D is about the only way I can think of too. But i would also consider jigging. Prop it up at an angle and do a 2D toolpath - now it does follow...
