Separate names with a comma.
Some features disabled for guests. Register Today.
Did you perhaps measure the potentiometer pins in respect to GND/Earth? From what i've heard they are floating around mains voltage relative to...
Now, main thing would be that the plasma is causing an adverse effect. Are you sure it really is blowback? Sounds like HF symptoms. Yes, as...
GitHub - grblHAL/core: grblHAL core code and master Wiki but a lot of the other subprojects has additional details too But very first page of the...
The firmware's wikis would be authoritive. As grblHAL is based on grbl, you might need to read both as the grblHAL wiki tends to indicate whats...
Have you tried an air-cut with plasma inverter off? Just a test to see if the 2nd alarm (reset) related to EMI
Please contact the vendor you purchased it from for documentation / assistance
Not a comms issue. Device is in Door mode. Closed the enclosure door, or disable the Door feature if not used
Did you disable Homing Cycle on the Grbl Settings tab?
Try the "Home" button But if you didn't home consistently you can't really reestablish origin reliably so you might have to scrap the piece....
Did you constantly remember to Home. All coordinate systems are overlayed offsets from the base coordinate system (Machine Coordinates) set by...
Oh, and do make sure you are using M4 (not M3) per Grbl v1.1 Laser Mode M4 Dynamic power works best with the more modern features and workflows....
No, but as its just a test to help you see if its software related (or not) give it a quick test on a normal PC
Try OpenBuilds CONTROL to see if UGS relates
Motors rarely fail. Unless dropped and snapping off a mounting ear or bending a shaft in the process. So more likely wiring
Unlikely. EMI has some tell tale symptoms (as per the link above) so lets check mechanicals. Grubscrews on all shaft couplers tight?...
1) Check you gcode in the 3d View, does it show these odd moves too? If not it could be 2): EMI: docs:blackbox-x32:faq-emi [OpenBuilds...
Per-line only feedrate is allowed. That is a max rate. Moving from one position to another it calculates the vectors for each axis and...
G28 and G30 are offsets from Machine Position (So remember to always HOME)
Gentleman, lets close this thread. In terms of Terms of Service and Rules | OpenBuilds - good luck on the design plans!
Your CAM workflow may be able to add it for you to the GCODE, otherwise edit in by hand / remember to send manually before running. Our Fusion...
