Separate names with a comma.
Some features disabled for guests. Register Today.
To really rule it out, do you have a different PC at hand you can do a quick test with? If it works on there, controller is fine
I am a little ahead of you. V3.22 (You) vs V3.27 (Me) [ATTACH] But we are both behind current, yours from 2019 (going on 4 years without an...
No issues here
That also works for me [IMG]
Yip, no issue. Opened file in QCAD, used Mouse to drag over everything to select it, went to Draw, Polyline, Polyline from Selection I also moved...
For support for the PLC and how to use it, you would have to refer to the PLC vendor/reseller for tech support. Some PLCs has gcode modules, some...
Make sure your acceleration/max rate is set low enough to not stall. Stalling during the move will affect calibration Also make sure its not...
Just try again, it seems comms was interrupted
I'd still say a PC problem of sorts. Did you reinstall anything else since it worked (firewall, 3rd party antivirus/antimalware, any other...
Check your Z axis calibration from Wizard and Tools > Calibration menu first. Also make sure your Origin in CAM is set to material top
Make sure to click the X32 tab. Even if it's already selected. That seems to be trying to flash a 4X. Might have a bug with the default selection,...
docs:blackbox-x32:aux-serial [OpenBuilds Documentation] Or if you can keep a computer nearby, perhaps easier to do it via Getting started with...
Please what? Sorry?
Wizards and tools > Firmware flashing tool > 3 axis with Door firmware option should do it See BlackBox X32 to learn more Syncing when to pause...
Yes, but the gcode feed might no be where you need it / need to start
No, not at this time.
Not easily no (custom firmware config, repurpose inputs like door, endstops, probe perhaps), but any chance your PLC can output serial commands?...
Sim keeps running when you switch tabs. It only stops when stopped using the stop button, or if the sim is finished (reached end of the gcode)...
Please contact the store for further assistance via Support > New Ticket
Post the file and I'll do it for you, with screenshots tomorrow when I am back in office :thumbsup:
