Separate names with a comma.
Some features disabled for guests. Register Today.
Still a thing yes, sign up to be notified (:
Those are symptoms of EMI. VFDs create a lot of interference, but keep working at it, as per the FAQ linked above. Earthing most importantly
S100= 100/1000 = 10% of 3.3v = 330mv so spot on yes You want S1000 Use the provided Tool On menu in CONTROL it does that kind of math for you,...
That settings are documented in the Grbl and grblHAL Wikis :) Of course just picking the nearest similar machine from CONTROL > Grbl Settings >...
Try docs.openbuilds.com > BlackBox > Current Adjustment page > fault indicators section about halfway down and have a read through it. Then keep...
X32: $5=0 or $5=7 if you want it to act on all. Its a bitmask. X=1, y=2, z=4. XYZ =1+2+4=7
Drag the Jog speed slider back to 100%
Correct, you can. See docs.openbuilds.com > Software section to learn more
Leds are self-contained. Between probe and controller is a long wire - signal has to get all the way across that first for the other end of things...
That indicates you forgot to convert everything to Polyline. CAM needs Polylines docs:software:file-errors [OpenBuilds Documentation]
Try tools and utils > Interface Settings > Forget Wifi Then try again. Make sure you have a 2.4ghz network
As it boots up it shows the version on the big logo splash screen.. V1.57 is the latest. Does the Blackbox work fine with the Computer? Just to...
Step 3 needs step 2 to complete. Establish connection to BlackBox first to complete bootup. Only once its up and running can you continue with step 3
It certainly can, though compatibility with Easel is mostly limited to the Export to Gcode option: You can do that, then run the Gcode in CONTROL...
Did you follow all the setup steps in docs:interface:start [OpenBuilds Documentation] first :) Particularly the three Important Notes at the top...
That indicates the VFD's Minimum Frequency parameter hasn't been configured correctly. VFDs has a parameter that basically says "if the input goes...
Jumper on M3/M5 if you want the relay to click on M3/M5 commands, yes
CAM is browser based, so OS agnostic As for running the machine completely offline, consider a BlackBox X32? Onboard SD, Wifi, Mobile web...
Header > Content > Picture. The first option is : Disable the Relay Typical for Lasers, or when you have a Spindle wired to the PWM/0-10v...
So this might be a "How" problem. You want the servo to act as a "pen lift" - not a "pen pusher" Gravity or Rubber band to push pen down, servo...
