Separate names with a comma.
Some features disabled for guests. Register Today.
Do you have another computer to try? (Could be something PC specific, we know it works fine for everyone else) Do you have any firewalls, etc...
Yes, not related. It moves to Z+5 first (Usually up and out of the cut) and then XY (has forever) Door switch for an enclosure's door yes....
Unable to replicate, all three test files loads in super fast time over here (realtime GIF below out of Screen2Gif)[ATTACH]| PS: some of the...
It changes from time to time, either an OpenBuilds Logo, or news, sometimes a coupon you can use in the store, etc. Whatever it shows, takes...
Sample file to reproduce? Only one that really does slow down with viewer, and really does not with the above procedure. Reproducable examples are...
Try othee values until Z is the Parking axis. Maybe 2? Should he lit when the switch is closed (SIG to GND)
Screenshots, logs, any other Clues? What exactly are you doing? (should CONTROL > Grbl Settings tab > Select machine from the list > Save and reset)
Turn off Soft Limits for now. Get it all working correctly first. Soft limits needs Homing, Homing Dir and Max Travel correctly configured, it...
docs:software:file-errors [OpenBuilds Documentation]
The frontend (GUI) sits on top of a backend (Server) that talks to your controller. Thats all exactly fine But your GCODE doesn't start running...
Your computer doesn't have a working python install. Try a different PC (Windows a little easier, doesn't need python)
Right, next up, you said But then posted the Serial log (no GCODE) Can you properly post the GCODE so we can check for you? Use the Upload a...
Been available for months via grblHAL Web Builder, but coincidentally, see section 7.2 of the BlackBox X32 documentation (and 7.1 for...
Still no reply to the very first question? [ATTACH]
For the BlackBox X32, that is the correct way. Y1 and Y2 on Y1 Driver, Y2 becomes the A axis Flash the 4-axes firmware from Wizards and Tools >...
Did you skip the Grbl Settings tab > Select LEAD1515 from the list > Save and Reset step? Stuck Hard Limits sounds like $5 is set incorrectly...
The 4X or the X32? docs:blackbox:start [OpenBuilds Documentation] You forgot to answer CONTROL as in docs:software:openbuilds-control...
Did you follow all the setup instructions in the BlackBox X32 Documentation? Didn't perhaps skip over Section 7.1 of the documentation?
Right, so @Baroudeur 1) First off, wire a NO switch to the Door Input. grblHAL expects the switch to close GND and SIG on the Door input when the...
Use a decent driver like a DQ542MA (: It does it all for you! Will have way more power than an H-Bridge based driver - thats all on/off - no...
