Separate names with a comma.
Some features disabled for guests. Register Today.
vs Combined with overhead from losses on the drivers etc Drivers have heatsinks for a reason, burns off some of the power there in switching...
Did you follow all the setup steps in the BlackBox documentation (Particularly, didn't skip section 7.1?) If you did, please do follow section...
Try the additional PSU option
Are you on Version V1.0.367? That looks like an error from running an outdated version (always keep CONTROL up to date)
Which servo is it? Perhaps a little too high on current draw? If so, can power it up externally :...
Or just borrow a Windows machine for the quick update, Mac and Python paths can sometimes be tricky
You can please log an enhancement request at Github.com/OpenBuilds/OpenBuilds-CONTROL/issues/new thanks!
1) Did you follow all the setup instructions in the BlackBox docs? Especially section 7.1 (read 7.2 as well) - up to date firmware is a must 2)...
Please post a Grbl Settings backup, lets just make sure all the other settings are correct too
Thanks for the suggestions!
Clip the magnet to the flat on the collet - larger surface area makes for a tonne of grip
Correct.
Probably unlikely - 140A is way outside the range of the 65A Its also bare, no plumbing included etc which complicates issues again finding the...
Not likely to happen, because no one normally uses parts that bad.
HF won't work! Their high voltage high frequency pre-arc will trip up USB, HDMI, Endstops, even cameras. Its a 1950s technology still sold on the...
No, because that would be a serious and unexpected mechanical abnormality. Calibration corrects for minor tolerances. 10mm falls under the "not at...
Speak to any one of the other 100+ aliexpress/amazon stores that sells torches (:
Talk to the vendor.... They can put any plug on any torch.
Noooo that will cause a lot of EMI issues! Blowback is best! You have a good inverter, just the wrong straight torch. Just return and replace the...
Natively no, will have to be a Javascript Macro It CAN do what you need, but you'd have to build it Something like parsing the editor content for...
