Separate names with a comma.
Some features disabled for guests. Register Today.
As servos rely on pulse trains for position, resets etc (times when firmware is not running) stops pulse trains. Design your hardware so m3S0 does...
CONTROL has a Socket.io "websocket" like interface that reports statusses like that. So if your Panel can get on the network, and talk Socket.IO..
If you have a BlackBox X32: Set the Homing Sequences Additional or extended settings If you have a BlackBox 4X: You'd need to recompile Grbl:...
Best I can offer there is "go with your gut" If you are not 100% sure it could have been a mistake, a loose wire straggler outside a terminal, or...
If that damage was caused by the Laser module itself, BB could be at risk too. It's not advisable... Creates a possibly false sense of safety!...
Without also modifying the backend, probably not. At the moment it is a little secure (we don't want baddies using CONTROL to do bad things) Oh...
Correct scripts can't access file system, only user actions. Security reasons in chromium
It is. See Set $44 (first homing sequence) to 4 (z axis = 4 in binary mask) Set $45 (second sequence) to 1 (x is 1 in binary mask) That would...
Looks to describe PD0.11 the same as the one I had one hand. Do check my other post above linking to the resources section
Sorry to hear that - did you find root cause? Just raising potential issue - if it was something like using a 3rd party PSU (not ours) and not...
Found something here HY SERIES VFD AND BLACKBOX SET-UP OPTIONS also says PD011 should have been the one, but it should be 0 to enable shutdown...
When you get a chance, drop the exact VFD model number in here (or the correct manual if you have a link), just in case I was looking at the wrong...
That is good to know, the X32 works correctly then. I was guessing off the manual, so that's not the right parameter yet. I don't have a...
Homing and Limits are all controlled by Grbl Settings: Grbl v1.1 Configuration and Additional or extended settings If you are running the 4-axes...
That is correct (if $30 is still set to 1000, just make sure it did not change) M4 is Dynamic Power - so have read through Grbl v1.1 Laser Mode...
Thanks. Wiring looks good, will take your word on BlackBox side Between and almost an hour passed, so apologies if you do have to reconfirm,...
Can you post detailed pictures of your wiring (you can do so with your request to the store too - that will be the next question. Something is not...
Perhaps some defaults changed along the way, while trying random things. - Take a backup of your Grbl Settings (Backup settings button on Grbl...
See first post in this thread, other users reports it works
When subjected to EMI the touch chip sees events from buttons that aren't being touched while you jog (interrupting the current jog) or sees...
