Separate names with a comma.
Some features disabled for guests. Register Today.
Didn't you read the whole page? Just one of the 4 options has no jumpers (VFD/Laser/IoT) By default the jumper is installed in the factory on...
Most plotter CAMs outputs S-commands for pen-up/down (Servos have been standard for a while) - Z would "work" with router gcode to some degree,...
Log copy out of CONTROL from connection, to test, so we can check the Grbl Settings, command log, etc Relay should click before you need to...
Happy to help, but still waiting on you to answer the questions we asked above
Fix/Install Python, or try a different computer
Error means you skipped a couple steps in docs.openbuilds.com/interface The timeout on connection, also. Possibly didn't read the docs and saw...
Good luck
Some inverters use a 4-pin connector where 2 of the pins are 1:50 voltage sensor output, the other two are triggers. Refer your Plasma manual But...
OK we'll work around that (: grblHAL and grbl doesn't respond to "?" during a "$$" (; - but thats OK, there are several "not grbl compatible...
Not ready yet... still several outstanding tasks: FluidNC support · Issue #283 · OpenBuilds/OpenBuilds-CONTROL Will announce when its all working...
What are you doing to tell the plasma to trigger? Using the testing menu (Tool On in CONTROL?), manual commands (forgetting the S-Value?) or from...
Long straight moves are best to test stalling (accelerate, get to top speed, slow down - reliably) - to get up to speed you need distance You...
3500 is a good starting point. Then tweak upward until you stall out. With the stallpoint known, dial back a 20% margin for reliability Repeat...
In the background it uses barely any resources (it does nothing) , and disabling autostart breaks things like the webserver, integration API,...
grbl/config.h at master · gnea/grbl says it should (Defined in the map here grbl/cpu_map.h at bfb67f0c7963fe3ce4aaf8a97f9009ea5a8db36e ·...
Well, or theres more to the story. When I do a recovery on Original gcode.gcode from line 33526 It does not add G10s - so... did you add those...
Are you using our MeshCAM Post Processor? GitHub - OpenBuilds/OpenBuilds-MeshCAM-Postprocessor Apart from that, it does appear something to-do...
grblHAL has an Embroidery plugin: GitHub - grblHAL/Plugin_embroidery: For streaming embroidery files from SD card, currently .dst and .pes...
You are just sending G10. G10 needs other parameters too (for example G10 L20 X0 Y0 Z0) Learn more at G Codes That lonely G10 might be present in...
We'd say much easier - exactly as shown in the videos - and also in the links shared above:
