Separate names with a comma.
Some features disabled for guests. Register Today.
Feed rate not specific or undefined.... Versus F0 for a feedrate You can't move at 0mm/min it won't go anywhere. You probably don't have valid...
Try a different computer (just to prove to yourself the application works fine - which it does - but the specific issue is that PC (conflicting...
Check local sellers, cut50l is available even here in rural part of South Africa where I am Hynade also makes a cheap one. Several vendors has...
That log shows a controller reset, so could be EMI, but could also be intermittent wiring short somewhere (dropping 5v rail momentarily)
Is your inverter a CNC suitable (LF or Blowback start) and not perhaps a HF inverter? HFs are for hand cutting. For CNC you really want a...
Correct! 4X users would only reflash for advanced config changes (parking, door, servo, 2 axes etc)
The link at the top of the page in the introduction? That's for more info (some folks may want to learn more about the firmware in use, and yes,...
No jumpers needed to update, but note Grbl (8 bit version use on the 4X) hasn't had any major updates in years. What is your intention?
BlackBox Firmware: 1) Visit the Documentation (linked above, along the top of the forum in the menu - or head to start [OpenBuilds...
Then Max S-value is 24000 so you should use M3S24000 (that is explained in our documentation too) Adjustment is also shown in the docs I linked...
Unsure, best to ask VFD vendor, or cross reference writeups in docs:blackbox-x32:connect-vfd [OpenBuilds Documentation]
OpenBuilds CONTROL > Grbl Settings tab > Scroll down to Wifi SSID and PSK and enter your network details. Click save. Once done press reset...
Vfd? Check Min Freq in VFD parameters
Fantastic, but just an fyi, the forum can't assist with missing parts, for that, you'd have to contact the store (Support > New Ticket)
Personally, switch for me. I really don't want my spindle accidentally activating. Even a small spindle can still skin a finger
No, M3/M4 operates Relay 2 We don't recommend putting spindle "ARM" under software/relay control though! (bad things can happen if relay...
Screenshot please. That is not a known error message Reset (reboot) the onboard microcontroller
Please try to stay up-to-date on operating systems too. Windows 7 is retired: See Microsoft Windows (8 and 8.1 too, 10's been available since...
Color coding on our wires changed a couple years back, and we haven't sold workbee kits in a long time either. Both good clues (: The color...
3rd party motors, or OpenBuilds motors? If its 3rd party ( or old kit just getting round to building now), see...
