Separate names with a comma.
Some features disabled for guests. Register Today.
As per above, the only thing we apply to the 2-axes firmware, is setting the Homing Sequence as described in the Grbl FAQ (linked) If you...
See docs:xyzprobe:wiringgeneric [OpenBuilds Documentation]
Not a $$ settings no, but you can flash the 4th axes firmware from CONTROL > Wizards and Tools > Firmware flashing tool > BlackBox X32 > Machine...
include video links :) to avoid confusion [MEDIA]
Not sure what you are missing, but Min Feedrate is not always limited by a config, but by timer resolution and frequency. The reboots might be...
We already run grblHAL Reboot loop is indicative of something wrong in your firmware setup , to recover flash our standard grblHAL from wizards...
You can use Y2 for X as well if you want to: set X to Ganged: See http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox X32 This will...
Port Error 31 is possibly: docs:blackbox-x32:install-windows-selective-suspend [OpenBuilds Documentation] or docs:blackbox-x32:faq-emi [OpenBuilds...
Well, Gcode can't really cause a disconnect, so what does the Serial Log show? docs:blackbox-x32:faq-emi [OpenBuilds Documentation] more likely then
Contact your CAM vendor and enquire about the correct post to get standard Grbl compatible gcode: Home It's up to the CAM vendor to supply posts...
Profile not found. Can you share a screenshot? That's not a CONTROL error?
Sadly I don't know, but contact the store via Support they will definitely be able to give you an ETA (different teams) New stock will be the...
I can see three screws from the right before the one used, so it was wired correctly in the video., but the angle does make the label look wrong....
Please see section 15 of Terms of Service and Rules | OpenBuilds Thanks
Once its tested and merged you'll be able to tick on Wifi/Telnet etc in Web Builder
Check out OpenBuilds Part Store > Linear Actuators
Yes it will get merged (see auto Square issue · Issue #64 · grblHAL/ESP32) and you are helping with the testing before it does (: At this time we...
See docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds Documentation] as well
Lower resolution, faster top speed. Toltally workable Might catch on the slot sides, belt pinion has part of the belt laying in the slot. In...
Yip LED- going into AC EARTH instead of DC- on PSU Move black wire over one more terminal 9v is way too low for a 24v LEDs string, not enough...
