Separate names with a comma.
Some features disabled for guests. Register Today.
Then you still haven't corrected Grbl Settings tab > Scroll down to $5 limits Invert and change it If its currently 7, set it to 0 If its...
So, not sure if its a language barrier, or something like that, but I am having trouble completely understanding this reply Which of these two...
M3S1000 (don't forget the S) yes G4 P1 would pause 1 second yes. However, you'd never hand-write that. Use a CAM - both OpenBuildsCAM and our...
Also see other questions (not answered yet) Pin? How are you turning on the VFD? Using a control signal pin from the BlackBox, or manually....
Start here (: docs:blackbox-x32:layout [OpenBuilds Documentation] BlackBox 4X could also do all that. Nothing "new" there - just set up for...
Yes. Set Hard Limits to Disabled in Grbl Settings, but would have liked to work through it so we are sure its not hiding some other issue
Servo in Grbl is not a "z axis" - its a tool, responds to S-values Not familiar with dTools but in OpenBuildsCAM you can set S-values to use for...
But you report it does stop when you unplug your sensor.
What is the "aviation plug" - what exactly do you have? not one of our machines? Is it our Probe or something 3rd party as well? That's not...
Use the Troubleshooting tab in CONTROL to monitor the Probe status. Perform some eliminative testing: - magnet on spindle - triggered or not -...
That points to the sensor itself. Would you consider our proven switches instead? Better repeatability, reliability, easier to use and would...
OK support will continue with you from there then, best to avoid duplication (same issue posted to multiple seperate support channels) Thanks
During the sweeping, nudged wiring? Unplugged something? Etc. Any shorts (shorting V+ to GND can damage the 5V regulator onboard) etc
According to STAHLWERK CUT 70 P IGBT Plasma cutter with PILOT ignition, 499,99 € that is a HF inverter. You need a LF/Blowback start for CNCs:...
Nearest similar one, or the CUSTOM option then scroll down and customize accordingly (read the Grbl Wiki at Github.com/gnea/grbl/wiki first)
Yes, more likely just turned up a bit too high
Correct, you DO need the PSU on. Can you point to the faulty info you mentioned earlier then? Or did you misunderstand and the video info is...
See the Fault Indicators section of docs:blackbox-x32:currentadjustment [OpenBuilds Documentation] and keep an eye out for the indicator light....
Tested and Pause does work fine for the X32, so when you revisit, make sure BlackBox firmware and OpenBuildsCONTROL are both up to date
This may help Getting started with Javascript Macros in CONTROL / Library of Macros created by the community
