Separate names with a comma.
Some features disabled for guests. Register Today.
Then the same reply would apply (: Include detailed pictures of your VFD wiring when you contact them, to allow them to assist you better,...
See 2nd half of docs:blackbox-x32:currentadjustment [OpenBuilds Documentation] See docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds...
See the 2nd half of docs:blackbox-x32:currentadjustment [OpenBuilds Documentation] for information on the Fault Indicators
Well, do check the settings, make sure $4=0 (For X32, or =1 for BlackBox 4X) is still set and check that the power is still working right (Fan...
For motors to move you just need two things: 1) Power on (24v) and working correctly 2) Machine Profile loaded (Particularly to set $4=0 for X32):...
Remove the motor (never spin motors by hand, they work like generators, backfeed your electronics, causes damage to stepper drivers) then spin the...
The most stress-free option would be to rather use one of our recommended suppliers: Lasers - OpenBuilds Part Store - both provide excellent...
For assistance please contact the Store via Support Thanks
Fluid NC in CONTROL is not ready for prime time yet. See FluidNC support · Issue #283 · OpenBuilds/OpenBuilds-CONTROL Spindle rpm, jog distances...
Disconnect the motor from the machine (mechanically) and test it on the desk - to eliminate mechanical binding etc please?
See docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds Documentation] But also check the grubscrews on the shaft coupler, may be slipping on...
When enabling Autosquaring at http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox X32 - the Probe input is repurposed as the Y2 switch...
Fusion allows import of Sketchup files.
Not directly no. Interface predates the X32s existence, so doesn't cater to all the newest features. It will still stream 4axis jobs, but no...
Thanks for the suggestion
When it moves, does it move perfectly smoothly or is it more like a shaky, powerless move?
If ita an X32 make sure to see section 7.1 and 7.2 of the BlackBox X32 Documentation at docs.openbuilds.com
Something you'll receive when you get the automatic update to V1.0.363 of CONTROL. The current certificate expired a couple hours ago, had to...
Start by reviewing the documentation: docs:blackbox-x32:start [OpenBuilds Documentation] But also see the Software documentation that goes...
That sounds like you are opening an OBC file not a gcode file. OBC files gets sent back to CAM - please double check
