Separate names with a comma.
Some features disabled for guests. Register Today.
If you could have a go at running CONTROL from Terminal, so we can see if there are any errors thrown it could help (:
Update: V1.0.359 or later = FIXED Thanks all, we will investigate. Seems to affect Mac and Linux. Use 348 for now, will post once found and fixed
Possibly related to Cannot load in CONTROL in IOS You can try an older version. But if you have a moment, run CONTROL from a terminal so we can...
Will check when I get to the office, thanks for the report
Not easily no, but you are welcome to discuss the need with the motor/motor controller vendor - see if they have a way to accept the standard...
OK thanks, we will investigate and keep an eye out for other reports. In between then and now quite a bit changed,...
(: Setup an 'allow' for CONTROL and turn it back on - just in case! (: Firewall rule: Local PC IP on ports 3000 and 3001 for TCP.
There we go, oldie but goldie :) Mentioned it earlier: _____________ Aluminum oxide is insulating, so this only happens if the screw scratches...
Make sure your computer firewall allows the webserver to be open Make sure your phone and computer is on the same network and can see each other...
Sadly no, they don't seem to accept PWM or 0-10v (both industry standard) control signals
Give that one a go please, does look like something corrupted in local storage. Devtools (Ctrl+Shift+i) > Application tab > Local Storage >...
Possibly set earlier by accident. The clicking noises is the clue that at the time that was going on, $4 was already set incorrectly. Also a clue...
BlackBox X32 is $4=0, as set by all our profiles. When you set it to $4=1 it would have kept working until next reset (some grbl settings only...
Going back one revision is not quite an Older version :) both was released yesterday. Try one from like 3-4 months ago as a test please
Does work fine here, so that is odd. Open the Devtools (Ctrl+Shift+i) > watch the Console tab when clicking the menu item - see if theres any...
No known issues at this time, but do check if an older version works: see Releases ยท OpenBuilds/OpenBuilds-CONTROL Also, what version of MacOS are...
Contact the store via Support > New Ticket and they can help you with the issue
It's not a CONTROL issue, so no the update would not have helped. Besides, check the Changelog to see what's new, would also help you decide if...
Checkout the Software section of the same docs.openbuilds.com Direct link: docs:software:overview [OpenBuilds Documentation] (see menu on the left...
Are they Bipolar? I haven't followed this thread, but have you looked at the BlackBox? docs:blackbox-x32:start [OpenBuilds Documentation] - 2.1 is...
