Separate names with a comma.
Some features disabled for guests. Register Today.
Yes! You do need to tell it to turn on the spindle. See:
Yes, as mentioned, dial down acceleration / max rate. Profiles are recommended settings, but one should tune your own setup. Being a kit sometimes...
Any earlier wiring different from the picture you sent? History along the way could have an impact Also post a Grbl Settings backup
The laser profile has higher acceleration/max rate Adjust down accordingly, something on your machine is a little tight. Or do you have any 3rd...
Correct on all 3 points yes
Read the Laser Mode section of the Grbl Wiki Make sure your spindle is wired as per our documentation
Yes for odd shaped tools you'll want to get a couple cheap 1/4" Dowel / Gauge pins in your tool drawer. Probe XY with the dowel pin, swop in the...
See docs:blackbox-4x:jumper-relay [OpenBuilds Documentation] Both laser and spindle = jumper removed.
That would be the reason yes. You can order replacement cables from the Openbuilds Partstore. Contact via support.openbuilds.com
Jumper, no. Jumper is always removed. Only in place for Plasmas. $31 can be added to your CAM workflow. In the gcode header. Super easy
$32=1 for laser, $32=0 for spindle. Remember to change according to the job at hand
The firmware inside CONTROL is for Dual Y. Just do make sure you have the latest CONTROL. Motors randomly changing direction is more likely wiring
Rated 10/10! Looks great, and exactly the spirit of the keyboard shortcuts! Well done
See the Documentation : docs:blackbox-x32:connect-vfd [OpenBuilds Documentation]
Depends where you installed the switches? At axis maximas? (Back, Right, Top)? Would definately make a difference: Wouldn't show you the error...
Check the link carefully: [ATTACH] My theory too. Motors doesn't die (easily) - its always wiring. Almost always - at least often enough we...
That means - You forgot to Home (Rehome to be certain - homing can become undone after resets, reconnects, alarms, errors, etc) - You homed, but...
If you need a mounting solution: Router / Spindle Mount with the 65mm reduction: Router Mount Adapter fit 65mm body spindles
