Separate names with a comma.
Some features disabled for guests. Register Today.
Have you tried a test with just BlackBox (no other wiring attached) and USB. No power, limits, motors, etc. Nothing but the USB cable (just to...
Did you remember to install drivers? Section 4.1 of the BlackBox Documentation (also remember to do section 4.2)
Dust hoses are mentioned in the FAQ. Along with Earthing instructions. Do work through the FAQ as advised earlier:
Contact the store via Support > New Ticket for assistance. Please include a link to this thread
Did you follow all the steps in docs.openbuilds.com/interface - there are some X32 specific steps, so worl through the documentation again please....
Click the Files and Drawings tab above ^
As mentioned: Every machine is a little different, your current acceleration settings might even have been tuned a little to be more aggressive...
Correct, also make double sure the signal really is dry contact (no stray unexpected voltages) The input expects SIG to be pulled to GND. A pullup...
Our system wires the motors in parallel, so nothing particularly interesting. You do have a BlackBox? If not - the BlackBox has decent drivers....
Seeing as this is an edited version - what changes did you make, and also post the origin file without your edits just in case PS: if you want to...
Yes, the X32 is quite a bit different yes. The DOOR input is functional once configured, but: We recommend you keep to the recommended...
Yes $14 should work: From Additional or extended settings <control mask> = bitmask where bit 0 = reset, 1 = feed hold, 2 = cycle start, 3 =...
The V3 should still work in CONTROL If the machine doesn't move when you jog its either power or Grbl Settings Also make sure you do have Grbl 1.1...
Wall socket > https://www.rockler.com/safety-power-tool-switch > power strip > everything else
Over time it may cause overheating issues, so shielding them is never a bad idea. A regular clean out with an air duster also helps
BlackBox 4X or BlackBox X32? If its the X32, is your Firmware up to date? docs:blackbox-x32:firmware [OpenBuilds Documentation]
Possible you have both plugged in at the same time? If so, focussing on which has which com port makes it harder than just doing one at a time...
Did you remember to load a machine profile on the Grbl Settings tab > Select a machine from the list > Save and Reset? Update itself would not...
Section 2.2.2 of the BlackBox X32 docs: docs:blackbox-x32:microstepping [OpenBuilds Documentation] Current adj is also there, just look at the...
See Additional or extended settings It really is a shame their 0-10v implementation doesn't follow industry standards. There really isn't a great...
