Separate names with a comma.
Some features disabled for guests. Register Today.
Won't be easy to update that then But - consider a BlackBox. Grbl 1.1 is getting old too - the newer generation BlackBox X32 runs on grblHAL, 32...
If you see an "atmega328" chip onboard thats the "arduino" part If you don't mind the risk of possibly bricking it (can be recovered if you buy a...
Make sure to convert all entities to Polyline: docs:software:file-errors [OpenBuilds Documentation] Document tree shows these are still of...
Use our machine profiles please. If you try "random numbers" we'll all just have a bad time Our profiles sets the defaults to expected values FOR...
That's showing Triggered because you don't have a machine profile loaded yet If the Grbl Settings tab does not display, try disconnect, connect...
There are older PDFs (not been updated in a while) in the Solidworks library under Resources (inside the ZIP) but we'd strongly recommend 3D....
Don't forget the bearing block thickness too - and oh with the knockoff rails - better to order them and caliper it out - datasheets are usually...
We'd strongly recommend a couple hours in CAD planning out the build. Designing it in CAD allows for "trial and error" without spending a cent or...
Super easy to do: grblHAL web builder > set Z to "ganged" > build and flash
Yes, every time you start a job!
You set the origin by using jogging/setzero, or get yourself the XYZ Probe: See docs:blackbox-4x:hello-world [OpenBuilds Documentation] for the...
Not intended, though there is a THC plugin for grblHAL you can explore. It would entail some out-of-the-box innovative thinking as BlackBox...
Position is adjustable - you'll typically set it up as low as possible, so you can use the shortest endmill possible - that way you have the most...
Fixed!
Checking (:
Checkout sharkbits [OpenBuilds Documentation]
Same instructions as BlackBox 4X
Yes! If you have a BlackBox 4X: Go to Wizards and Tools > Firmware flashing tool > Select 2-axes under Type and then Flash If you have a BlackBox...
@Chris Smitty Will be included in V1.0.349 or later - coming out maybe around the end of the week. Thanks for the suggestion [ATTACH]
On the Grbl Settings tab - Set SOFT LIMITS to DISABLED. Click Save and click RESET when prompted. You are not ready to use Soft Limits yet Also...
