Separate names with a comma.
Some features disabled for guests. Register Today.
What controller? Have you taken a backup (CONTROL > Grbl Settings tab > backup settings button) -And then post a backup of your Grbl Settings for...
EMI causing false triggers. Bare arduinos lack filtering that a proper controller like a BlackBox has (Optocoupled and RC filtered inside the...
Can you please explain what happened? Did you follow the FAQ page (link provided in error message)
Looks that way, thus trying different host to confirm or not
Sounds like serial queue bugs.. If its Grbl 1.1 try CONTROL from software.penbuilds.com
If you did, you could have used a JS macro to hide Z elements (DRO, buttons, etc) on startup. You'll have a hard time finding something "off...
Do you have any coding skills? Javascript in particular? Getting started with Javascript Macros in CONTROL / Library of Macros created by the...
Where you had "2 wires into the 4 pin plug" - use the same two pins (eg GND and 0-10v) but on the 0-10v plug just about in the exact same spot....
OpenBuilds CAM prefers closed vectors. Try Lightburn
If David doesn't come along with a reply, cross posting that question on the Fusion forums may yield more info - the non standard stuff always...
That was my first thought too, but not always ideal Which is why David recommended using the A-Axis on the X32. And why I recommended Fusion 360....
OpenBuildsCAM is a free, entry level 2.5D CAM, so no. Fusion 360 might.
You are going to need software the outputs proper GCODE.
Actually, if I was you, I'd rather put the PSU money towards something proper: RoutER11 CNC Kit Those little DC motors are massively underpowered,...
See the above
Is it a DC "spindle" (brushed motor with a collet pressed on?) I would NOT share a PSU with that - the startup current will floor the PSU...
CONTROL is the more fledged solution. Interface is meant for that "on-machine" lets just run the job applications. Loved by those that mass...
Add a G4 Dwell after the M3 Sxxx spindle on command: G Codes to give it time to spin up You can turn on the spindle from CONTROLs Tool On menu,...
The DOOR input in Grbl is a compile-time option, you can try http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox X32 > Safety Door...
Not this one? Enter to go to entered value, Shift+Enter to set current position as the entered value? [ATTACH]
