Separate names with a comma.
Some features disabled for guests. Register Today.
What is your homing seek and feet rates set to?
Doesn't sound like it would have caused issues From a best-practice point of view, if you really wanted to implement filtering, I would do it...
Checkout the DOCUMENTATION link along the top of the forum menu above ^ Some of the more important pages Software overview docs:software:overview...
Console with Fire Button does the same G1 trick we do, so it is interesting. 2.5 of 255 = 1% though, it might be too low to initiate the laser...
You are 100% sure you setup light burn to use the Grbl (v1.1) method? Old Grbl (0.8/0.9) just used M3 (would light up Tool Enable, no PWM)? See...
M3/4 lights up Tool On - but no need to mention it. Thats used as a Tool Enable (Think Spindle running off an IoT relay) - not related to lasers...
Confirmed then, its something Lightburn related.
Have you updated recently? So you are on V1.57? It could be - if you know of any damage it could have picked up over time. We have cable tie...
B BlackBox 4X or BlackBox X32?
Exactly, i think Lightburn might not be sending the right commands, and once confirmed we'll send you over to their Forums. As it works with Jobs...
Those have terrible backlash. Stick to our stuff (;
Sounds like you do not have Hard Limits turned on: As you had an existing working config already: Make sure to BACKUP the settings on the old...
PWM should light up too, when grblHAL receives the correct command (unless you are testing at like 1-5% that is very dim you'll barely see the...
More out of curiosity - if it was only attached to mains side - no worries. But if it had any connection the DC domain (including GND - or any...
As an easier alternative checkout Machine Kits - ACRO System - OpenBuilds Part Store Kitted with all the parts, detailed build guides and videos, etc
Not with CONTROL specifically, but Macs having trouble with Python Paths I have had before. Had to google up an article to point you to on the fly (:
Yes, openbuidspartstore.com ships internationally File: drawing (1).svg was created in inkscape version 1.1. Setting import resolution to 90dpi...
Look at the PWM LED (the laser is wired to PWM - not Tool Enable - so the Tool LED is not related) Check your Grbl settings (post a backup) and...
