Separate names with a comma.
Some features disabled for guests. Register Today.
BlackBox 4X: 5V BlackBox X32: 3.3V
Circled the places to click for you: [ATTACH] And confirmed that the encircle file "V-Slot OX_Build_81_DXF Plates.dxf" does contain the...
Nothing extra. Z's wire in parallel at the existing Z axis. You are good to go.
Scroll this page up a bit and click the Files and Drawings tab ^
Just a test bed so yes didn't insert an SD :) for our use case we'd prefer shipping V3 preinstalled (flash or littlefs) The less we have to let...
Correct, if current firmware is a little old (v1.51 or older), you should use Method 2 (USB) or 3 (CONTROL) to catch up first. If you are >1.52...
OK so did a quick check. Just to get back to you on it: Web Builder > Set Network Tab > WebUI to "v3" Ticked on Telnet server. WebSocket and...
That just looks like travel moves between cuts. If your laser also turns on for the brown sections, you likely don't have Laser Mode correctly...
$23 - Homing Direction
Go to CONTROL > Grbl Settings tab To disable Z homing, just set set $44=3 and $45=0 in the Grbl Settings
It's a PNP type. You need NPN type. That same shape/style with NPN can be found on Amazon/Ebay/etc
That's also why you need a hardware E-Stop: https://www.rockler.com/safety-power-tool-switch
Not yet. But the key thing here is GOTO 'should' never crash the bits, if you SETZERO correctly. If that results in a crash, you have a different...
Yes calculated steps per mm. See the Grbl Wiki to learn all about the settings
1) Check mechanicals: loose setscrews on leadscrew coupler causing slippage? 2) Check Acceleration not set too high - 3rd party motors may be...
Will recheck, couldn't load up the maintenance page. But for us as a company that extra upload step is a pain. V2 was included inside the binary -...
Our included firmware haven't gone to V3 (yet!) will do soon. Web Builder's builds set to V3 doesn't load up web interface. Haven't looked into it...
Try more advanced CAMs. See docs.openbuilds.com > Software section OpenBuilds CAM is a basic free entry level CAM where it only accepts...
Check Calibration from Wizards amd Tools > Calibration menu
Use the Jog Override slider to set jog rate
