Separate names with a comma.
Some features disabled for guests. Register Today.
That would be best! Unfortunately, for liability reasons, we can delve into DIY mains switching solutions
Should be 24000 for a typical 24krpm spindle
Thanks for confirming. Try going into Tools and Utils > Interface Settings > Turn of Feedback and Beep (both uses a bit of extra power) and try...
As a very basic free introductory CAM, we use polylines. As you have Fusion use its CAM - you already know and have a better CAM at hand. Just...
And OpenBuilds "What" 1510? Workbee? LEAD? Sphinx?
By the time you have smoke, best bet would be to wait until Monday on the Store. They will help best they can.
Other way round. Home first, then setzero. Machine Coordinates is the base coordinate system. Every other coordinate system and stored position is...
MacOS used to include Python (and it just worked) but either the existing install has an issue, or you installed Python seperately - causing an...
Are you homing yet? The Machine Coordinate moves relies on it - so it has to be in place - if not you'll see weird behaviour as Z0 in Machine...
Ideally CONTROL needs Closed vectors. See docs:software:file-errors [OpenBuilds Documentation] Open Vectors are a best guess effort. Otherwise...
As you mention end of the job, does your machine perhaps run into the limit switches at the end of the job? (as in triggered switches, not just...
Remember to DISCONNECT in CONTROL? Don't remember if Lightburn has a Connect button, otherwise may need a restart of the application Then...
Let us know what they say! I know it used to work - so would be interesting - maybe a bug in vectric itself, or something that the post needs to...
Its supposed to, but if that doesn't work we'd recommend contact Vectric Support - they may need to make changes to our post (they maintain it...
You posted a Lightburn log earlier (Pay attention to the S value - if Max =1000, then 20% should be sending S200) [ATTACH] For CONTROL you'll find...
G53 = machine coordinates It does Z-safe moves in Machine Coordinates (not work coordinates) However, the default value in the Post options are...
Then checkout our Vectric post: docs:software:vectric [OpenBuilds Documentation]
They are run in parallel, they are not independant axes. That makes it a bolt-on upgrade without needing to change your electronics setup
What controller are you running? BlackBox or something else?
Doesn't really matter, but whatever you have $30 set to, should match what you tell Lightburn you used as Max too (So it all lines up) [ATTACH]...
