Separate names with a comma.
Some features disabled for guests. Register Today.
EMI is typically induced in cabling, so not particularly more robust to switch to Inductives (still same length of cable). If you have our...
1) Check all wiring making sure there aren't any accidental shorts / chaffed through wiring / etc 2) Climate changing (India is moving toward...
Do you have a Blackbox? Or 3rd party machine/controller?
If its a false trigger (axis really didn't hit a switch) its likely EMI: docs:blackbox:faq-emi [OpenBuilds Documentation]
No! Please do bring some humour! (: It really does lighten our days. Sorry if I misunderstood it, I really thought you were upset about the Fuse....
We cannot, as damage might be spread across multiple components. Also, that level of support is sadly out of scope for us. If the issue due to a...
Yes, you can place an order on BlackBox Motion Control System X32 - during checkout it will help you set up shipping details Remember to apply...
That's up to you and your electronics skillset. Otherwise you'd have to get a new BlackBox. Or just turn the VFD on manually using its front panel
If you have a BlackBox X32 - make sure your firmware is up to date: See docs:blackbox-x32:firmware [OpenBuilds Documentation] and note the...
That is sad news, the afore mentioned warnings that hooking up the 3.3v pins to the VFD will lead to damage, seems to have taken its toll then. So...
You can trust our design decisions - appropriate circuit level improvements were applied accordingly. I'll assume the rest was said in jest. Its...
Thanks for the report, both are ESP32 based, both have Mode/Reset buttons, will update message (Interface tool was built first, extended for use...
Does it power up via USB cable (Into its USB-C socket on the side?) Does it power up when connected to the old BlackBox?
ESP32/BlackBoxX32_map.h at master · grblHAL/ESP32 lists all the pins but also see Added Openbuilds BlackBox X32 Example Config by synman · Pull...
The Meanwell PSU we recommend has very fast-acting overcurrent protection built it - would kick in way before a fuse would blow. Fuses don't...
OK shielded cables may help if the VFD is creating a lot of EMI: Review docs:blackbox-x32:faq-emi [OpenBuilds Documentation] Yes please do find...
Also double check shaft-coupler grub screws, and make sure all the Eccentrics are correctly adjusted.
OK so now PWM Spindle Freq is set to 5000 in the backup you provided. (despite earlier confirmation that you set it to 400 and then 100 - so...
You seem to have a lot of unneccesary "EMI mitigation" going on - we don't use shielded wiring, we don't have extra EMI filters - so to answer the...
Sounds like EMI: See docs:blackbox-x32:faq-emi [OpenBuilds Documentation]
