Separate names with a comma.
Some features disabled for guests. Register Today.
See earlier And related to that See custom macro in Getting started with Javascript Macros in CONTROL / Library of Macros created by the community
Not from your description of the symptoms. Run the flashing tool as advised, from your CONTROL 1.0.342 If you haven't done it yet - it can't do...
Handibot® Large Material Indexing Jig I like the concept - a big ruler/straight edge with indents basically!
Make sure it doesn't still have an HF component to it (Blowback with HF pre-arc to establish main arc) Maybe, but it would be way better to...
If they aren't ours, do check their electrical specs (inductance, resistance, etc) to be sure they are a good match (as close to the specs of our...
Fault Indicator comes on for: - Short circuits - Undervoltage - Overcurrent - Overtemp Screw shorting wires could well have been the first,...
Look for the motor's datasheet first. Post it here, so we can first check if the electrical specs make sense or might cause damage.
Just see the link I posted way up top. It explains it for you step by step
Much easier to explain than the two wire swop. Reversing the entire set also reverses the motor
Needs a firmware update: See section 7.1 and 7.2 of the X32 documentation: docs:blackbox-x32:firmware [OpenBuilds Documentation] And...
Thanks for bearing with us, gotta do the setup first, to see. Retrofitting older ones can be a little hit or miss (they were out long before we...
Or, rather just make use of your warranty, contact the store via Support > New Ticket We of course had to make sure you followed the standard...
Did you follow all the steps I outlined, or only the firmware update?
We prefer you work through the docs chronologically so you don't miss a step, but the important ones highlighted for you with DIRECT links: 1)...
Solution exists in the documentation: Make sure to work through docs.openbuilds.com/interface
You could call another macro from a macro yes. See OpenBuilds-CONTROL/macros.js at ef770352c4bc254c30e12548e268cc09ae08b0eb ·...
It does make "a difference" - direction the motor spins - but so easy to correct if you do get it "wrong" that it doesn't really matter. If you...
See docs:blackbox-4x:faq-identify-motor-coils [OpenBuilds Documentation] to learn all about that. +/- doesn't really matter - what matters is a...
Thanks for the report
Cross check the Grbl Wiki - it has the raw Uno pinouts (Probe is labelled there). See the Connecting page of github.com/gnea/grbl/wiki
