Separate names with a comma.
Some features disabled for guests. Register Today.
Switch to using Continuous Jogging. Hold down button as far as you need to to. More modern way to jog. Also, too slow acceleration and max rate...
It means the machine is NOT idle yet. Its busy doing something else (bottom bar of screen will show what state its in). Perhaps alarmed? Check on...
(: Yeah, the relay is for controlling stuff. The Normally ON outlet, turns OFF when the spindle signal comes through. Thus turning off your PSU -...
First guess: Do you have an IoT relay? If so: Did you accidentally plug your 24v PSU into it, thinking its a Power strip? Make sure the PSU is...
For Vectric, you may need to edit the ShopBot Post processor to include it in header/footer: M8 on M9 off
Ahh you and Marc both have no profile pictures, his was secondhand and the refresh discussion had mostly been with him, didn't notice you were...
1) about 3-4x more torque from the motors (belt machines needs power more than leadscrew machines because a belt is not an efficient transfer...
Replacing damaged rail, and wheels both would be the first thing yes
Load up one of our profiles as a base (CONTROL > Grbl Settings tab > Select machine from dropdown). Custom or nearest similar machine. Save and...
M8 = on, M9 = off Your CAM is supposed to add that to the gcode file for you so it all happens automatically
Settings are stored on the controller, not the computer. See github.com/gnea/grbl/wiki to learn more See docs.openbuilds.com > blackbox > FAQ > EMI
It is a bit out of date yes. But not useless. Problem with older stuff (electronics) is lack of docs, compatible software and that sort of thing....
I make use of dowel pins but checkout the Vectric Youtube channel and others' Vectric Tiling tutorials - lots of cool different ideas out there
Yes you have (in a good way!). The bed itself is larger that the "working area" (actual cuttable dimensions) and standard sheets slide through...
That's also related to outdated firmware so push on with the flash See sections 7.1 and 7.2 of docs:blackbox-x32:start [OpenBuilds Documentation],...
That's not what its for - nothing to do with Interface. You use CONTROL "OR" Interface, not both Checkout docs.openbuilds.com/interface again...
Work through docs:blackbox-4x:faq-usb-connection-failed [OpenBuilds Documentation] first, your retailer and other support players are mostly...
You can do either of the following: 1) Invert the Pin in software ($16=1) but note that when powering down the BlackBox it might go back to the...
Corrected link: BlackBox X32 BlackBox Motion Control System X32
Use method 3 then docs:interface:firmware-update-control [OpenBuilds Documentation]
