Separate names with a comma.
Some features disabled for guests. Register Today.
Not easy, but checkout Start at gcode line
Emergency stops should always cut POWER In case of a real emergency you don't want to depend on software (or even a switch wired to the...
Try V1.0.342 and report back if issue persists, thanks!
1) update GPU drivers 2) update Chipset drivers WebGL gets disabled by the embedded instance of Chromium if your hardware/drivers are blacklisted...
OpenBuilds CONTROL > Connect to the controller > Grbl Settings tab > Select any of our machines from the list > Save and reset when prompted....
Jog speed is determined by Steps per mm, Acceleration and Max Rate in Grbl Settings Steps per mm, because your commanded move is in mm/min - and...
along with and Consider the three points (Using M4, with Laser Mode enabled, and getting changing PWM out of the port during moves) along with...
Or even better, just install Homing switches. It really is worth the couple bucks to have repeatable machine coordinates. HOME, ZERO, RUN (: SIMPLE
Contact the store via Support > New Ticket and they will sort it out for you
I meant tool on material kind of more extreme vibration - when it start doing real work
Thanks for the details! Is it a moving gantry machine, or fixed gantry? If its moving gantry, the USB cable may be tugging at the port causing...
We're far behind, but have not had a need to update yet :) Almost doubt it but you never know... holding thumbs (oops thats a local saying)!...
esptool version? On windows we've not update the included binary in a while, still including esptool.py v2.6 - and it works
Thanks! It was a challenging one to lay out - because the layout was inherited from older BlackBox that had a lot less going on it, ATmegas are...
Yes, shorter USB cables are the way to go, as recommended Probably goes hand-in-hand with my earlier (unanswered) question then? So, you have a...
To configure a Servo, you theoretically should only need to play with Grbl Settings - on the BlackBox 4X we had to recompile, but theoretically...
No errors in there, but keep an eye on it when you experience issues. In the same screenshot we see a list of ports so the "problem" was not...
Grbl will make the move, IF your machine has the required precision to do so. For example (using one of our machines as I don't know what you...
Does any of the upgrades result in fundamental changes? Bigger belt: but did the pulley teeth count or belt pitch also change? (Wizards and Tools...
Released Quarter 2 (Apr-Jun) of 2009 making it about 13 years old. [ATTACH]
