Separate names with a comma.
Some features disabled for guests. Register Today.
Did you remember to HOME to establish Machine Coordinates? Most often people forget to home, machine doesn't know where G53 coodinate set is,...
The Meanwell PSU might be (check the datasheet), but the Power Case attached to it is not.
Please contact the store via the New Ticket option under https://support.openbuilds.com for assistance (:
docs:software:fusion360 [OpenBuilds Documentation] is our Grbl compatible Post
Ahh gotcha. Yeah, same thinking. Firmware is correct, laser is inverted (wiring or jumpers if laser has any)
You'd checkout Lightburn or Home - LaserWeb / CNCWeb instead - use a Laser specific CAM for advanced options See docs:software:overview...
Which you can only achieve by recompiling Grbl (which he says he did not) Or some laser modules (and all CO2 PSUs) have options for TH or TL...
Thanks for the suggestions! Having our XYZ probe will greatly enhance your experience - no need to precision jog when the probe can do it for you...
I'd suggest replacing that PC with a decent one I'm afraid. That's very little, a big 3d carving finishing pass gcode file can generate a 3D view...
Check calibration first, if it's not that, we'll look into mechanical issues. But "too large" is usually more a calibration issue. Mechanical...
Cut depth can be set yes: [ATTACH]
Depends (: Checkout docs:software:overview [OpenBuilds Documentation] for a broader overview The "depends" matters on what kind of files you...
OK, so you are using OpenBuilds CAM We do not use homing/machine coordinates/etc - only more advanced CAMs do that So, for OpenBuilds CAM to...
Sorry, please, then do tell us what? You haven't confirmed on denied - so I continued with the assumption, sorry! Indicating the GCODE is...
He's referring to the parameter in the Post Options inside Fusion (Not the Grbl setting)
Yes
The tab just left of the Troubleshooting tab you were on in your screenshot [IMG]
You are on the Troubleshooting tab, not the Grbl Settings tab...
Grbl Settings tab > Scroll down to Laser Mode > Dropdown to Enabled > Click Save at the top > Click Reset when prompted
Please reach out to the Store again, and they will sort it out for you. Or if you haven't returned the bad USB port one, swop out the front panels (:
