Separate names with a comma.
Some features disabled for guests. Register Today.
There is no such error message, please get the exact wording / picture of the error (: so we can assist you with the correct resolution.
Can you elaborate please?
He is referring to steppers, your question was: And for that, your control: Which device (VFD or Laser) has POWER. Its a single source signal,...
If it does wire simply, then just needs the addition of a software toolchain (CONTROL does not support 3D probing) as well - no recommendations on...
Seperate teams, so please log ticket with the Store via https://support.openbuilds.com and include a brief writeup that you need a new cable, but...
Probably an old controller that Isn't running Grbl 1.1? Grbl 1.1 came out in 2016 already, and uses the $J= jog command format.
Good job
Ok that's great then :) was just double checking, as seeing the USB cable, made me think it might also be getting 5V off the USB (thus measuring...
You can wire a 24v light to the Coolant output and setup your CAM to add M8 at the start, M9 at the end. See docs:blackbox:connect-coolant...
But I see a USB cable in the photo (: - was the other end unplugged?
1) use a multimeter or elimination strategy 2) identify the miswiring or other cause of short circuit 3) then fix that
Yes, see above. Been saying the spindle is likely the short all day already (:
Post is correct, you just have to remember to HOME the machine to establish G53 Coordinates correctly
Sorry not sure what you mean. As mentioned above: Take a Multimeter, and find where in your system, you are shorting DC GND to AC Earth. These...
You'd have to measure (: its about the VFD side of things usually. Check for continuity between EARTH and GND
If you plug both into a power strip where each socket has a switch, that would work -
See if your BlackBox Outputs 5V between the 5V and GND pins with USB cable disconnected? If not, could indicate a blown 5V regulator on your...
For most accurate Z setting, get yourself an https://docs.openbuilds.com/xyzprobe (: Will consider the request for three decimals for a future update
Wired correctly? Any continuity between Earth and DC GND (should not be)
