Separate names with a comma.
Some features disabled for guests. Register Today.
Tell us a little more about your setup. What controller, what spindle, anything non standard in your machine, etc. Always as in always, or, for...
Yes. But, you need to control which one is on/off manually as its actually one signal. Simply power on/off the relevant device (for example, turn...
Contact the vendor your purchased it from for tech support please. Or request a refund and get a genuine machine from openbuildspartstore.com or...
Its a modular design, change what you wish. But again, you are far better off building a LEAD1010 for example. The Ox is not nearly as capable as...
Speak to http://support.openbuilds.com/support/home and they will be happy to assist
Any nearby sources of EMI that could interfere with the touch interface? Flourescent lights, VFDs, etc
The OX is quite an old machine (2013 vintage), rather consider building one of the more modern kits? Machine Bundles - OpenBuilds Part Store -...
A good supporting structure underneath the machine certainly helps. Bracing to prevent sagging, absorbing machine vibrations, improving your...
Running CONTROL: Officially, no, but Installing on Pi4 · OpenBuilds/OpenBuilds-CONTROL Wiki does exist (at your own risk)
Ahh ok, thanks for clarifying, thought it was a seperate issue. (:
Cannot find any other threads from you about this issue under this username? Tranferring supporting files is shown in the documentation:...
How to calculate V-Slot® deflection may apply
It should work (nice low voltage coils) and should be a little more powerful, even if running at about half of maximum amps. The 3.5mH inductance...
Post the workspace export, and we can check it to see what went wrong
No, it just reads them off USB at the time you run a probe, just like it does for any other file. Make sure you used CONTROL > Wizards and Tools...
https://docs.openbuilds.com/interface - section 3.3 applies to copy the probe files to the USB drive - however, as the files are stored on the...
Get in touch with http://support.openbuilds.com/support/home and they will assist :)
Matches the symptoms of classic wiring issue indeed (only 3 of the 4 wires making good contact, or coil pairs incorrectly identified) - we have a...
Interface only supports standard bits, because tapers are not a viable option (you cannot get an accurate probe against a surface that is not...
This is an automated reply: For support questions, please make use of our Forums (not profile posts as you have done here): Support is done via...
