Separate names with a comma.
Some features disabled for guests. Register Today.
Its a complicated hobby, you will have to put in some time to read that Grbl Wiki (a couple times, until it all makes sense) and also additional...
Feed = how fast the machine moves around in XYZ. Tool/speed = how many rpms the spindle turns / how hard the laser burns (if tool is setup with...
You do not, no. As per docs:interface:prepare-blackbox [OpenBuilds Documentation] V2.8 and onward has "no preperation required" - just another...
It blinks red/green or green/blue (depending on the version of your BlackBox) when data is sent/received - it will almost never light up solid...
Thats a super old version of Inkscape (2017) - try to stay more up to date to avoid issues. You should be on 1.1.x Download Inkscape 1.1 | Inkscape
Play with your DPI settings, or use DXF (proper dimension info in the file): OpenBuilds CAM assumed DPI from the standards for different...
- Interface is as simple as it gets (sends the up and down override commands) , but it talks to Grbl on the other controller, so a basic...
Speak to the store via http://support.openbuilds.com/support/home and they should be able to assist (:
Please, do Post the files then please - we can only check gcode for you, if you provide it :) Possibly: you don't have the spindle on yet when...
See docs:blackbox:faq-emi [OpenBuilds Documentation]
Make sure you configured Lightburn correctly: docs:software:lightburn [OpenBuilds Documentation] Also see [MSG:'$H'|'$X' to unlock] [MSG:Caution:...
Probably the RUN/FLASH mode jumper : docs:interface:flash-run-jumper [OpenBuilds Documentation] The 5V pins are not jumpered, those exist for use...
Grbl reports it based on whether #define VARIABLE_SPINDLE is defined or not
Specifically, which error (code and text) , or even better a screenshot - would allow us to help you locate the cause. Without it, there are too...
Well not really. The ideal place is on the endmill (shorter conduction path) the collet trick is for the times where you can't get a good grip...
Files and drawings tab from OpenBuilds LEAD CNC Machine 1515 (60" x 60") has a Sketchup File you can open in Sketchup Make 2017 from Downloading...
OpenBuildsCONTROL > Wizards and Tools > Firmware Flashing tool can do that for you - and then you are sure its been done right Make sure its...
Clip it onto the Flat of the collet (:
Try $4=1 and 0 in turn, current setting may be incorrect
Yes, that is indicative of a blown 5v regulator. With USB providing 5V its not as noticable (though you will see other symptoms from the voltage...
