Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks for the report.
Per se, there is no File size limit (well, FAT32 file system has a 4Gb per file limit. Very unlikely to ever have gcode that big) , but the...
You earlier selected Custom on the one screen. Nothing out of the ordinary there. Flashing failed may be selected wrong port, different FTDI...
Click the BUILDS tab above, and then the big blue button that says "SHARE A BUILD" [ATTACH]
As its an open source dust shoe, I'd suggest taking that, and the machine model into CAD, tweaking the dust shoe design to add clearances where...
See docs:blackbox:currentadjustment [OpenBuilds Documentation] - properly adjusted current will help, also see the Fault section on the same page.
Negative... Grbl complains the data it received is corrupted Caused by EMI: docs:blackbox:faq-emi [OpenBuilds Documentation] Your router wiring...
Fantastic to hear! Glad you got it all sorted!
To me, it sounds like the end of the leadscrew is knocking inside the bearings - adding a little shimming to improve the fit helps (around...
As the mechanism is a little different (moving plate versus moving beam): go to OpenBuilds CONTROL > Grbl Settings tab > $3 Direction Invert > and...
Look online for "48v spindle power supply" - some takes a pwm or 0-10v signal. If you cannot find one, a 48v 500w+ PSU might work too (no speed...
Post some pics of your machine? 6040s are available with large spindles CNC 6040 so perhaps yours is something else? Or just need some help...
Make sure all chipset and other drivers are up to date. Make sure sections 4.1 and 4.2 of docs.openbuilds.com/blackbox has been applied
See above. It works for a couple thousand BlackBox users with no complaints. Nothing special in that. It runs stock standard Grbl from...
Y+ should go to the back, so you have to flip the switch under $3 Direction invert for Y Ps screenshot of settings is hard to read. Use the...
Make sure you have loaded the Acro 1510 profile from CONTROL - it sets the Max Travel distance (how far to go looking for the switches, and also...
Unfortunately we cannot deliver the same level of support for a product we do not supply as we could have if it was a BlackBox or any of our other...
Works perfectly with official Grbl (Gnea) so if it doesn't play with the 3rd party fork for your 3rd party controller, we are unfortunately not...
- Forgot to home to set the working envelope? - Axes Max Travel values correctly tuned? - Which application are you using? (CONTROL is for use...
Open it in Sketchup, extract the plate, and grab the measurements in Sketchup using the "find centers" function to identify hole centers, and then...
