Separate names with a comma.
Some features disabled for guests. Register Today.
Hi all I am using the black box x 32 on my ultimate bee 750x750 and open builds control software Homing all moves in the correct direction. The...
I am trying to use grbl for tangential knife cutting . I want to use XYZ limit switches. I don't want limit switch function for A axis ,but only...
I built a CNC router using CNC Shield running GRBL. I have proximity sensors for limit switches and after homing the machine I have set the...
Hi all, When setting up an new project (simple X-Z axis, without probe), I was able to set all options and have the table running to my liking....
I am trying to build my own CNC router using arduino Uno + CNC Shield and running grbl 1.1f. Everything works as expected, X and Y axis home...
Hi everyone, I'm new to the forum and I'm having issues homing my machine. I use a grbl32 board from Makerfr with oepnbuilds control (great piece...
So i like that there is a homing option. Unfortunately after homing the Z-axis it goes to home Y and doesn't register the limit switch which...
When I click the home button in OpenBuilds Control it works great and moves to the vertical top and closest left point on the machine. It...
I am using Candle on a 3018 machine. I set up the "work coordinates" with no problem(set the spindle on the starting point of the piece and press...
Hi I have just built a workbee 1000mm x 750mm screwdrive and have an issue with the limit switches. The limit switches do not cut the motors. The...
Hi, I've attached a short video of my Workbee homing issue. Any help would be appreciated. Regards[MEDIA]
Hi everyone. I'm new here but I have my first issue using my CNC. I have a well built DIY CNC router with A raspberry PI , BCNC and an Arduino to...
Looking for the correct settings or process. I have just set up my LeadMachine CNC 1010 with a Black Box controller. I was able to successfully...
Hi Everyone, I am trying to get my BlackBox set up on my cnc and am using the latest version of Control also. I am having issues with the homing...
I've built a single axis CNC based on the C-Beam and using an Arduino UNO running GRBL 1.1f. If I move the CNC to < 10 mm from the limit switch...
Hi all, Having trouble with the Z-axis when I run a homing cycle in CONTROL v1.0.149. The Z-axis doesn't even move when I hit Home All, though I...
Hi. I am a novice CNC user and just finished building my first machine; an OpenBuilds WorkBee 1510 with a Dewalt router. I'm stuck and don't know...
Hi , First off Thanks to GRBL Software Engineers for a great bit of Control Software My Set Up : I am Running GRBL 1.1f on a Mega 2560 - Was...
Hi everyone, I'm trying to set GRBL up for my new DLP printer. I disabled homing for X and Y axes in the config.h file as I just have the Z axis...
I bought an ox cnc machine from ooznest, and it didn't come with stop switches and the homing cycle is disabled on the controller, is running a...
