Separate names with a comma.
Some features disabled for guests. Register Today.
This is a simple holder for your xyz probe. I printed this standing up, I did use supports but that is probably not necessary. There are two...
Guys so I am trying to run the “Hello World” as a test and I ge the following error messages
Greetings everyone! Newbie here, I am having an issue first time running my blackbox: 1. Zaxis will not move 2. Zaxis "!" light is on. Current...
First time putting together a CNC machine, got all my parts from OpenBuilds and have a quick question, any advice or googling instructions...
I started this one off with an plank of wood I had laying around for about 15 years. I didn't know what species it was until I ran it through the...
I ran into an little issue with this one. It happens though. While doing the finish cut, I had something to do and left the machine run...
I made this one from a leftover piece of thick cherry wood I had saved. It's kinda small compared to most other carvings I've done in the past,...
If you guys and girls seen my last project using live edge, I mentioned I had found two pieces at a good price. One was Walnut (Tree Spirit) and...
Sometimes in life, you will encounter random, chain of events type things that just happen. Well....one of those happened for this project. The...
This is a Poseidon/ Atlantis mythical carving composite model I did using a couple different models. I used Meshmixer to extract the frame from...
This one started off with a 4" thick plank of wood of unknown species, re-sawn on my bandsaw, and thickness planed to 1.35" and glued up for this...
I know this is not my typical 3d carving I normally post, but I thought it might be helpful in some way to some one. Many of us do not own a big...
I just thought I would do a quick and painless how-to on masking/ painting signs using Oramask 813 by Oracal. I made a quick example using...
