Separate names with a comma.
Some features disabled for guests. Register Today.
I've decided to design my own spindle cartridge, and the problem I've run into after hammering out all the mechanical design details is what kind...
First-time power up today and everything worked as expected. I played with the servo and it worked fine. Generated new firmware for the coreXY...
Unable to get this model of servo working on BlackBox 4X. When setting up the pen wizard the servo responds to a very limited range of values...
I have an 2 axis ACRO system w/servo controlled by a Blackbox x4, with a python script utilizing michaelfranzl/gerbil for motion planning. The...
Drawing and Gcode are created by Inkscape, it's working good except the end of lines. My drawBot uses a SG90 servo to control the pen up and down,...
Hello. I've almost got my plotter up and running but am having some trouble with the servo. When running tests with a rather large Tower Pro MG995...
Hi! So I just bought two Genuine Protoneer CNC Shield v3.51 and realized that might not be the correct Controller for my prototype. I'm...
I am a millwright for a local company. We have this burn table. The controller went out and the foreman wants an upgrade. I came across open build...
I have a larger servo with a HSC86H hybrid step-servo. Is it possible to hook this controller to the BlackBox? I have a BlackBox on my CNC and the...
Hello, Total noob here, but I am doing my due diligence for a WorkBee 1515 build. I have a few questions regarding suppliers and hardware. First...
I'm using cprezzi's grbl-servo: cprezzi/grbl-servo Works great with only needing to use M3/M5 for servo control but there's very little to no...
Hi Am having a issue with the X axis on my GRBL CNC machine. Randomly the X axis stops moving at the end or start of a straight line. This...
