Separate names with a comma.
Some features disabled for guests. Register Today.
My lead 1515 x axis is binding I have done everything I know to fix it it keeps binding I’ve ran the lead screw with a drill I’ve use silicone...
Hello all, I finished assembling my Lead 1515 yesterday and when I got to the point of jogging the x and y positions I ran into an issue. Here...
Hi, This might have been asked before but I am having trouble with jogging X+, it moves ok with X- as do all the other axis, I have checked all...
Hi sorry if most or all of this has been covered but looking at possibly upgrading my Lead 1010 1. Raise x gantry to gain another 1" or 2" in Z...
The X axis drag chain on the workbee is very close to the wire for the Z limit switch. This spacer moves the drag chain 3mm further away from the...
:(hi all I’m after a bit of help. I’ve made a combined edge probe and touch plate for my cnc. Connected the positive to the plate and negative to...
Hi everyone, hope you are doing great! I have finish my first ox cnc 1500x1500mm and wired it but i have problem with my y and x axis. It seams...
