Welcome to Our Community

Some features disabled for guests. Register Today.

Creating long v-slot

Discussion in 'Tutorials' started by 4syte, Jan 10, 2015.

  1. 4syte

    4syte New
    Builder

    Joined:
    Jan 10, 2015
    Messages:
    1
    Likes Received:
    0
    I'm hoping to use some v-slot to support some sliding wall panels (6 @ 10 lbs), but I need longer runs that 3' - need more like 9'.

    Does anyone have tips / experience connecting v-slot end-to-end?

    Thanks
     
  2. Knut Bøje

    Builder

    Joined:
    Nov 20, 2014
    Messages:
    20
    Likes Received:
    23
    I think they sell lengths of 3 meter here.
     
  3. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,896
    Likes Received:
    1,555
    For a simple application like you are doing, double tee nuts should be sufficient. If the exposed screw head is a problem, set screws can be used instead. For something more seamless, dowel pins could be used in the center holes.

    Be sure ends are all properly squared up before you begin. You may also need to feather the v-slot at the joints a bit if you notice the wheels catching.
     
    Mark Carew likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice