Welcome to Our Community

Some features disabled for guests. Register Today.

Durability of Open Slot rails using metal V-wheels...?

Discussion in 'General Talk' started by Tony LaBelle, Jan 29, 2016.

  1. Tony LaBelle

    Builder

    Joined:
    Nov 27, 2015
    Messages:
    54
    Likes Received:
    6
    Hello All,
    Was wondering if anyone could advise durability of the Open slot rails using metal V wheels. I've had mixed information stating the anodizing doesn't last very long. Are the parts Hard anodized or just decorative? Thanks for advising.

    Tony.
     
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,443
    Hello Tony,
    The OpenRail black anodize is just for looks so running the steel v wheels on the track is not advised. You can run the Delrin V Wheel on the OpenRail without any issues.
    If you need to use the Steel V Wheels you will want to look for steel V track that you can mount to V-Slot for your build.
    Hope this helps
     
  3. Tony LaBelle

    Builder

    Joined:
    Nov 27, 2015
    Messages:
    54
    Likes Received:
    6
    Hi Mark,
    Ok thanks abunch for clarifying. Has the OpenBuilds team ever ran a test to see how long the Delrin lasts in the open track configuration? I'm trying to figure out how often I'll have to replace the wheels with moderate use conditions, (mainly machining Aluminum material).
    Tony.
     
  4. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,443
    Hi Tony,
    We have not tested them this way but I can say that we have run our OX CNC machine for over two years without having to replace them.
    I would say as long as you are patient taking shallow multi-pass cuts and do not push the machine trying to hog though materials. I see the wheels lasting a very long time. :)
     
    GrayUK likes this.
  5. Tony LaBelle

    Builder

    Joined:
    Nov 27, 2015
    Messages:
    54
    Likes Received:
    6
    Sounds great Mark, I'll definitely use the delrin V slot wheels. Thanks again for the support.

    Tony.
     
    Mark Carew likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice