Welcome to Our Community

Some features disabled for guests. Register Today.

Lead screw printer

Discussion in '3D printers' started by kylesmth, Jan 19, 2017.

  1. kylesmth

    kylesmth New
    Builder

    Joined:
    Jun 27, 2016
    Messages:
    17
    Likes Received:
    16
  2. Jeffrey Drake

    Builder

    Joined:
    Mar 11, 2016
    Messages:
    8
    Likes Received:
    1
    Do you happen to have a video of it moving? I am very curious how fast that thing can go.
     
  3. kylesmth

    kylesmth New
    Builder

    Joined:
    Jun 27, 2016
    Messages:
    17
    Likes Received:
    16
    It's definitely not as fast as a belt driven type but the quality difference is pretty nice. I've been running it around 70 mm per second with great results. I'll definitely get some video up in the next couple of days.
     
    snokid and Jeffrey Drake like this.
  4. kylesmth

    kylesmth New
    Builder

    Joined:
    Jun 27, 2016
    Messages:
    17
    Likes Received:
    16
    Sorry I was having some issues, I got a bit of a better video now. I'm working on getting a better camera this had to be filmed on my iphone.


     
    jamesdjadams likes this.
  5. Jeffrey Drake

    Builder

    Joined:
    Mar 11, 2016
    Messages:
    8
    Likes Received:
    1
    Interesting choice of base material. I was planning on a heated bed, so wood is out.
     
  6. evilc66

    evilc66 Journeyman
    Builder

    Joined:
    Jan 9, 2015
    Messages:
    393
    Likes Received:
    154
    Nice. Looks very similar in setup to my C-Beam based printer.
     
    kylesmth likes this.
  7. kylesmth

    kylesmth New
    Builder

    Joined:
    Jun 27, 2016
    Messages:
    17
    Likes Received:
    16
    i'm wondering if you have any issues printing smaller circles? it seems like it can keep up with everything else at a decent speed but I need to work on some settings to get it printing better with the smaller circles. What kind of jerk and acceleration settings are you working with?
     
  8. evilc66

    evilc66 Journeyman
    Builder

    Joined:
    Jan 9, 2015
    Messages:
    393
    Likes Received:
    154
    How small of a circle are we talking about?

    Jerk settings (junction deviation in Smoothieware) I left at the default for Smoothieware. I did have to lower the acceleration a bit from the default, but I can't remember off the top of my head what I ended up changing it to. I'm direct drive with a Titan extruder and a thin profile NEMA17 motor, so my X-axis carriage is fairly light, but a little heavier than yours. It was still enough weight to get it to skip steps under fast acceleration (3000mm/s).
     
  9. kylesmth

    kylesmth New
    Builder

    Joined:
    Jun 27, 2016
    Messages:
    17
    Likes Received:
    16
    Small holes as in M5 and M3. I will try to drop the acceleration a bit and see what kind of difference I get.
     
  10. evilc66

    evilc66 Journeyman
    Builder

    Joined:
    Jan 9, 2015
    Messages:
    393
    Likes Received:
    154
    Dropping the acceleration might help, but it's also dependent on what the actual problem is that you are seeing with the holes. It may actually be a slicer issue and you just need to drop the speed for external walls.
     
  11. evilc66

    evilc66 Journeyman
    Builder

    Joined:
    Jan 9, 2015
    Messages:
    393
    Likes Received:
    154
    I guess I haven't made enough parts with holes to comment either way on that particular issue.

    I know in Slic3r you can set the extrusion width for external perimeters. Have you checked that setting (or similar to it if you aren't using Slic3r)?
     
  12. kylesmth

    kylesmth New
    Builder

    Joined:
    Jun 27, 2016
    Messages:
    17
    Likes Received:
    16
    I'm using simplify 3d, I'll double check all of my settings. Im going to be doing some more testing today so I'll report back here with my results.
     
  13. kylesmth

    kylesmth New
    Builder

    Joined:
    Jun 27, 2016
    Messages:
    17
    Likes Received:
    16
    I've pretty much dialed everthing in now, the setting I'm using seem to be working pretty well. If anyone wants I could post my config.g here or my slicer settings
     
  14. evilc66

    evilc66 Journeyman
    Builder

    Joined:
    Jan 9, 2015
    Messages:
    393
    Likes Received:
    154
    In the Slic3r options, go to the Print Settings tab, and click on Advanced on the left. That will give you the options for adjusting the extrusion rate for different features.
     
  15. Ksweens

    Ksweens New
    Builder

    Joined:
    Sep 20, 2017
    Messages:
    1
    Likes Received:
    0
    Hey Kyle, could you post your config.g settings and perhaps a cura/sim3d/etc settings file? I'm curious as to how fast you can print without losing accuracy on small, complex geometry (basically can you match a regular belt-driven printer). Considering building an FT-5 format printer with C-beams for Z and v-slot leadscrews for XY.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice