Welcome to Our Community

Some features disabled for guests. Register Today.

Ooznest OX, Workbench, & Folding Table

Discussion in 'CNC Mills/Routers' started by Silverrabbit2, Dec 3, 2016.

  1. Silverrabbit2

    Builder

    Joined:
    Sep 17, 2015
    Messages:
    4
    Likes Received:
    21
    Silverrabbit2 published a new build:

    Read more about this build...
     
    Gunnar Norum likes this.
  2. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,021
    Likes Received:
    1,689
    I almost used one of those Husky tool chests for mine as well, but I wanted something a little wider. I had considered two back to back, but chose another method. For your folding version, the Huskey is brilliant.
     
  3. Silverrabbit2

    Builder

    Joined:
    Sep 17, 2015
    Messages:
    4
    Likes Received:
    21
    Thanks for your kind words.
    I needed portability & storage of tools.
    I was going modular until...
    I saw an old luthier table carver that tilted 45 deg for storage.
    I thought, why not 90 deg with a piano hinge.
    It fits thru a doorway. My goal was met.
     
    Jose A. Molina likes this.
  4. Joe Santarsiero

    Joe Santarsiero OB addict
    Staff Member Moderator Builder

    Joined:
    Oct 30, 2014
    Messages:
    902
    Likes Received:
    196
  5. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,021
    Likes Received:
    1,689
    I am so glad I read your post. I am planning to build a small shop and put my CNC in sometime in the near future. I completely forgot about getting it through the door. May have to build the shop around it.:eek: I could disassemble, but that would be a lot of work. Or, maybe I will go with a double door. :thumbsup:
     
  6. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,897
    Likes Received:
    1,555
    So when it's too cold in the garage you can move it into the living room. Sweet!!!! :thumbsup:
     
    Joe Santarsiero and GrayUK like this.
  7. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    It gets tricky, using a CNC, and watching TV in the lounge! :D
     
  8. Jose A. Molina

    Jose A. Molina Well-Known
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    62
    Likes Received:
    61
    This would make a great tool for schools where the classroom can change or not have adequate ventilation so it can go out to the room or parking lot and back into storage.
     
    GrayUK likes this.
  9. Daniel Harbin

    Builder

    Joined:
    Mar 7, 2015
    Messages:
    14
    Likes Received:
    1
    What about accuracy and alignment when the machine is folded or unfolded. I could see misalignment problems
     
  10. Ankur Bohra

    Builder

    Joined:
    Aug 1, 2017
    Messages:
    2
    Likes Received:
    0
    is this machine capable for machining on aluminium???
    if yes then...Can i get the CAD files please...???
    accuracy??
     
  11. Silverrabbit2

    Builder

    Joined:
    Sep 17, 2015
    Messages:
    4
    Likes Received:
    21
    Thanks for your comment. I find that the machine's performance in the horizontal position is only as good as the table is stable. The machine is not operated in the vertical position, but that does propose an intersting concept.

    Since my table it is based on an X-torsion wooden frame of plywood & pine, it has reasonable rigidy. I could not afford an aluminum or steel table at this time. There are also thermal expansion issues with the metal types. For now, I'm dealing with the aluminum OX on a wood table -- 2 differently thermal materials!.

    The machine is stored & operated inside my shop which has HVAC & is keep at 78F. I have no issues with alignment or repeatability to within +/- .003". I was able to tram the new 2hp router head to .001" in the Y-axis. The X, not so good. I noticed if I touched the OX framework anywhere that I could deflet the reading by .001. More serious force on the gantry pushed it as high as .005". The OX design is very nice but could be stiffened a bit in the gantry.

    My overall diagonal set up (the squareness of the OX framework was to .001" using the inside micrometer set that I had. Regardless, most work that I do on this size machine is fine with these tolerances up toan order of magnitude larger (10X), say .010".
     
    Daniel Harbin likes this.
  12. Silverrabbit2

    Builder

    Joined:
    Sep 17, 2015
    Messages:
    4
    Likes Received:
    21
    Thanks for your question. I have not machined any aluminum yet but it should be fine depending on the accuracy that you require in the finished product. If you look at the detailed post to the previous comments, you will see that I expect an overall tolerance about +/- .010, that is 20 mils total.

    The performance in any material is a combination of frame stiffness, motor horsepower, motor shaft runout, tooling runout & quality of the cutting tool. Then it is all about finding the sweet spot of feedrate & rpm for that tool. The hold down method & sufficiency is also very important link to the end result. Onsrud has a good info bulletin on this as does precision bits (Think & tinker). Vortex also has info.

    As for CAD plans, I did not start this project in CAD. I built the OX/Ooznest from their parts, then a table out of wood, then bolted on the table to the Husky, then the OX to the table.

    .Best wishes.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice