Welcome to Our Community

Some features disabled for guests. Register Today.

TABLE OX Router/3D-Printer

Discussion in '3D printers' started by angelo, Jun 2, 2014.

  1. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
  2. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Neat idea @angelo - I like multi purpose machines. :thumbsup:

    Tweakie.
     
  3. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,760
    Likes Received:
    2,443
    I like this one too and I think it would be cool as just a 3 tier router without the 3D printer! :thumbsup:
     
  4. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
  5. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
    Yippie, now I have the Parts.
    They was in the customs office (Zollamt).
    Now I can start to Build the machine :)
     

    Attached Files:

  6. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
    Sh**...
    i have ordered the1 x 8mm Acme Nut Block.
    But they had delivered the V-Slot ACME Nut Plate
    But I need this:
    8mm Acme Nut Block is Out of Stock
    I write them and ask, If they can send it.
     
    #6 angelo, Jul 16, 2014
    Last edited by a moderator: Jul 16, 2014
  7. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
    Now I have to wait for the Nema23, 0,9 Deg, 126Ncm, -> 23HM22-2804S
    http://www.osmtec.com/nema_23_stepper_motor_23_hm.htm
    And for the 8mm Acme Nut Block.
    By the Way.. The cut for the cuted Linear Rail (60x20) have a tolerance from +/- 0,2 mm.
    In the first Step I have put some Precision Shim - 10x5x1mm betwen the Plate and the Rail :-(.
    If it is possible for future Order, that we can get a Service of precision cut, that was for the next builders a great help.

    y-1.jpg y-2.jpg
     
    #7 angelo, Jul 17, 2014
    Last edited: Jul 17, 2014
  8. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
    MY Nema23, 126Ncm, 0,9Deg 126Ncm and 56mm Shaft was arived yesterday.
    And my 8mm Acme Nut Block is also now here.
    Thank you for you perfect Support to the OpenBuilds Team:
    23HM22-2804S.jpg

    Here my 1/128 Microstepperdriver (Nema23, 126Ncm,0,9 deg ->400 Fullsteps x 1/128 Microsteps = 51200 Steps per turn -> 96Khz Signal (ArduinoDue+RADDS v1.1) /51200 Steps/Turn= 1,875 Turn/second ->
    GT3-30Tooth = 60mm one Turn x 1,875 Turn /seconds = 112,50 mm/sec and 60mm/turn / 51200 Steps/Turn= 0,001171875mm/step)
    With this Setup you have a theoretic Precison of 0,001mm/Step and for
    Singlestepping a Speed of= 110mm/sec
    Doublestepping a Speed of =220mm/sec
    Quadstepping a Speed of over 400 mm/sec :)
    http://www.repetier.com/firmware/v091/
    (Allow quad stepping. Required for frequencies larger 24000 Hz.)
    http://www.robocutters.co.uk/proddetail.asp?prod=GT3PulleyBelt-OD30-ID8
    32-Bit Electronic:
    http://www.dr-henschke.de/RADDS_due.html
    1-128-assambled.jpg RADDS+LCD.jpg
     
    Mark Carew likes this.
  9. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
    By the Way..
    Why I would like to or what is my desicion to build an Router with Delrin Wheels and GT3 Timing Belts...
    They are silence, because I put the Router/Printer in my basement.
    So I can close the Basement-Door and my Wife and the Neighbours has no Problems with it.
    If I use Hiwin Guides (ritsch,ratsch) and if I use ballscrew with a pitch of 5mm (12 Turns Ballscrew =1 Turn GT3 30 Teeth = 60mm).

    For This, I think about a 2,2Kw WaterCooled "China-Spindle" (reasen, because I can Plugin a 12 mm diameter Shaft for Wood..)
    Have anyone experiance with low-noise Spindle up to 300 Watt?
    (Sorry for my bad english)
     
    #9 angelo, Jul 22, 2014
    Last edited: Jul 22, 2014
  10. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
    This was we like to Print maybe ...
    nurflügler+fräse.jpg
     
  11. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
    The Electronic setup:


    [​IMG]
     
    #11 angelo, Jul 31, 2014
    Last edited: Jul 31, 2014
    Mark Carew likes this.
  12. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Thank you for posting these excellent video's Angelo, they are most informative :thumbsup:

    Tweakie.
     
  13. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
  14. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
    Endstops and last V-Slot for Z-Achses (60x20) arrived :)
    I Thing i have now all I need
     
  15. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
    a short question...
    Everyone knows a loudnes or silence Spindle up 200 Watt?
    Otherwice I think about a 2,2KW China Spindle Watercooled.
    Thank you for the Answers in advance
     
  16. angelo

    angelo New
    Builder

    Joined:
    May 26, 2014
    Messages:
    16
    Likes Received:
    4
  17. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,760
    Likes Received:
    2,443
    Yes @angelo but yours looks like it will be much easier to make for sure. :thumbsup: I was taking a look at how to build that one and it looks like it will take some time.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice