Welcome to Our Community

Some features disabled for guests. Register Today.

#WinterBuilds Contest - 3 prizes! {Congrats to our Winners}

Discussion in '* CONTESTS * Win Cool Stuff!' started by MaryD, Feb 15, 2017.

Thread Status:
Not open for further replies.
  1. MaryD

    MaryD OpenBuilds Team

    Joined:
    Apr 13, 2016
    Messages:
    649
    Likes Received:
    639
    Snowflake Gears_socmedia.png

    Winter is the perfect time to hibernate in the workshop and get some of those projects completed.
    Show us what you’ve been building or cutting this winter for a chance to

    win a Genuine OpenBuilds T-Shirt!
    shirt_clr.jpg

    >>> 3 Prizes! 3 Ways to Win <<<

    MANY WAYS TO ENTER:

    Enter 1, 2, or all 3 ways for more chances to win!

    1) OpenBuilds.com - Post your photo in thread below to enter the contest.

    2) INSTAGRAM - Follow/Tag OpenBuilds then
    Hashtag your pic #WinterBuilds for a chance to win the contest.

    3) TWITTER - Follow/Tag OpenBuilds then

    Hashtag your pic #WinterBuilds for a chance to win the contest.


    Multiple entries are permitted.

    WHO WILL WIN: There will be 3 lucky winners. Each winner will receive 1 OpenBuilds T-Shirt as follows:
    (1) OpenBuilds.com winner
    (1) Instagram winner
    (1) Twitter winner

    RULES: Open to all registered OpenBuilds.com members, Instagram and Twitter followers. No purchase necessary to win. Contest runs from February 15, 2017 through March 1, 2017 at 23:59:59 Eastern Time. Winners will be randomly selected. OpenBuilds will publish all winners on OpenBuilds.com, Instagram, Twitter, Facebook, and Google+ OpenBuilds accounts. Winner must provide valid name and shipping address to receive prize. OpenBuilds is not responsible for non-delivery of prizes due to invalid address or other technical failures. Winner assumes all responsibility for any taxes and fees associated with prize. Winners have 7 days to redeem prize from the time winners are announced by OpenBuilds. Contest is in no way affiliated with Instagram or Twitter.
     
  2. Marmil

    Marmil New
    Builder

    Joined:
    Jan 27, 2017
    Messages:
    3
    Likes Received:
    5
  3. Garrettcompston

    Builder

    Joined:
    Dec 14, 2015
    Messages:
    6
    Likes Received:
    5
    Here's my custom cnc build excuse the mess lol
     

    Attached Files:

    Mark Carew, kylesmth and MaryD like this.
  4. kylesmth

    kylesmth New
    Builder

    Joined:
    Jun 27, 2016
    Messages:
    17
    Likes Received:
    16
  5. Jason Courtney

    Builder

    Joined:
    Jan 31, 2016
    Messages:
    1
    Likes Received:
    4
    WP_20170108_14_39_05_Rich.jpg Just another 3d printer!
     
    Mark Carew, MaryD, Kyo and 1 other person like this.
  6. seedorff

    seedorff New
    Builder

    Joined:
    Jan 15, 2017
    Messages:
    3
    Likes Received:
    8
    IMG_4408.JPG

    Wired up for an open build
     
  7. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    Does this count? ;)

    new-home-construction.jpg
     
    Marmil, Ariel Yahni, MaryD and 2 others like this.
  8. Rodm

    Rodm Well-Known
    Builder

    Joined:
    Jan 3, 2017
    Messages:
    121
    Likes Received:
    42
    Nice looking project! A very ambitious DIY project. hope all goes well. Should be room for a great workshop in there somewhere.
     
  9. Rodm

    Rodm Well-Known
    Builder

    Joined:
    Jan 3, 2017
    Messages:
    121
    Likes Received:
    42
    Hi,
    It's not much but I just got the openbuilds bug in January! This used to be a cluttered up corner of my basement. I'm realy liking the way the workshop is shaping up. So anet a8 is not an impressive build but it's up and running. I have my cnc control box started and on table. Other parts in the mail and finalizing a OB parts store order to be placed this weekend. I hope the sale discounts are HUGE!
     

    Attached Files:

    RSW, MaryD and kylesmth like this.
  10. BeTrue3D

    BeTrue3D New
    Builder

    Joined:
    Dec 31, 2016
    Messages:
    20
    Likes Received:
    25
    I've been working on my BeTrue3D Printer the last 1-2 months - planning started in the christmas holidays, when I had a lot of fun (was bored) at my inlaws for a few days, hehe.

    From planning to exection:
    BeTrue3D with extruders.jpg BeTrue V3 - 14012017.jpg IMG_0071.JPG

    I am blogging about my progress on my BeTrue3D blog: Projekter – BeTrue3D
    Latest blogpost was about mounting my PEI-Coated aluminium bed
    IMG_0098.JPG

    Before that, I had a huge post with lots of assembly photos, and a section dedicated for the extruders, which I've designed myself.
    IMG_9692.JPG

    I'm using Duet WiFi and Duex5 for this build, where the hotend is going to be a prototype of the 5way Diamond Hotend!
    IMG_0102.JPG IMG_9643.JPG

    Small, almost daily, update are put on my facebook page: BeTrue3D | Facebook
    The build is also listed here on OpenBuilds BeTrue3D Printer but need to update it some.
     
    RSW, MaryD and jamesdjadams like this.
  11. BeTrue3D

    BeTrue3D New
    Builder

    Joined:
    Dec 31, 2016
    Messages:
    20
    Likes Received:
    25
  12. BeTrue3D

    BeTrue3D New
    Builder

    Joined:
    Dec 31, 2016
    Messages:
    20
    Likes Received:
    25
    Wauw! whish I had a place like that! :) I'm just cluttering up a corner of our living room (behind a pillar though).
     
  13. Rodm

    Rodm Well-Known
    Builder

    Joined:
    Jan 3, 2017
    Messages:
    121
    Likes Received:
    42
    Thanks,
    But it's not where but how well you do it!. Looks like you can do good anywhere.
     
    BeTrue3D likes this.
  14. alan richard

    Builder

    Joined:
    Sep 27, 2014
    Messages:
    12
    Likes Received:
    41
    [​IMG]

    Still at the 'spaghetti everywhere' stage . . build detail to follow

    a
     
    Kyo, MaryD and seedorff like this.
  15. Tracy Ranson

    Tracy Ranson Well-Known
    Builder

    Joined:
    Nov 4, 2014
    Messages:
    88
    Likes Received:
    32
    mycnc.jpg mycnc.jpg swift.png
     
    MaryD and jamesdjadams like this.
  16. Tracy Ranson

    Tracy Ranson Well-Known
    Builder

    Joined:
    Nov 4, 2014
    Messages:
    88
    Likes Received:
    32
    My wife likes to make a lot of stuff with yarn especially in the winter time. So I made her a yarn swift with the machine that I recently completed. swift.png mycnc.jpg
     
    RSW, MaryD and Rick 2.0 like this.
  17. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,898
    Likes Received:
    1,556
    As long as it's a project.

    new-home-construction.jpg

    There, that should qualify. A stick built clock stand. :)
     
    MaryD and Anthony Bolgar like this.
  18. jamesdjadams

    jamesdjadams Well-Known
    Builder

    Joined:
    Nov 1, 2016
    Messages:
    40
    Likes Received:
    48
    Can the prized t-shirt come in XXL? I'm asking for a friend... :)
     
  19. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    I wish I was really building that house, I would doble the space I have for my hobbies! (Currently using 800 Sq ft of the house)
     
    jamesdjadams likes this.
  20. Robert Kirkpatrick

    Builder

    Joined:
    Jan 3, 2017
    Messages:
    32
    Likes Received:
    7
    True Up Glide 3d printer completed and bloomin wonderful it is too!![​IMG][/URL][/IMG]
     
    MaryD likes this.
  21. Robert Kirkpatrick

    Builder

    Joined:
    Jan 3, 2017
    Messages:
    32
    Likes Received:
    7
    True Up Glide 3d printer completed and bloomin wonderful it is too!!

    [​IMG]
     
    MaryD and jamesdjadams like this.
  22. OpenbuildsRyan

    Builder

    Joined:
    Dec 15, 2016
    Messages:
    2
    Likes Received:
    10
    Hot off the CNC(actual pictures coming soon). Project details and DXF plans in the Project Resource tab.
    Crib Picture.JPG
     
    MaryD likes this.
  23. MaryD

    MaryD OpenBuilds Team

    Joined:
    Apr 13, 2016
    Messages:
    649
    Likes Received:
    639
  24. seve030608

    Builder

    Joined:
    Mar 22, 2016
    Messages:
    4
    Likes Received:
    11
    OneZ i3! First build I have ever done and not the last!
     

    Attached Files:

    RSW, MaryD and Robert Kirkpatrick like this.
  25. jamesdjadams

    jamesdjadams Well-Known
    Builder

    Joined:
    Nov 1, 2016
    Messages:
    40
    Likes Received:
    48
    A Colt m1911a1 (my first double-sided cut).

    IMG_1883.JPG IMG_1881.JPG IMG_1880.JPG

    -Jamie
     
    RSW, PhotoSgt85 and MaryD like this.
  26. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,022
    Likes Received:
    1,690
    jamesdjadams likes this.
  27. jamesdjadams

    jamesdjadams Well-Known
    Builder

    Joined:
    Nov 1, 2016
    Messages:
    40
    Likes Received:
    48
    Hi Craig,

    This was my first shot at it but it went fairly well. I learned a few things that I will try next time.The trick for me was to have very square stalk (I spent some time with this). I also had milled some of my spoiler board away to give me relative to the machine X and Y positioning "ledges". I had already done this when I was testing my machine's setup. Using a piece of 3/4" MDF as a spacer to accommodate for the rounded spoiler board corner, I fastened it down in the corner with a few screws. With my stalk dimensions in hand, I started working away in Fusion 360. I configured the CAM to "float" the model in the center of the stalk. After milling a series of cuts for one side, I unscrewed the stalk, flipped it over, re-fastened, then changed my origin in Fusion 360 to the inverted corner. I created new toolpaths then began milling again.

    Lessons learned: I haven't built a touch plate yet and my zs were off a little bit after the flip. This was because I had to reset my TinyG after it (or I) messed something up, post flip. Theoretically, I shouldn't have had to so do this but if I had had a touch plate it would have much easier to correct / reset. I am using Fusion 360, Chillipepper and TinyG. I like Chillipepper with the exception that it seems to loose communication intermediately with the TinyG (about once every 3-4 hours but it varies). I'm not sure what is taking place but I suspect the JSON server or Chrome being pushed to it's limits. Chrome and Chillipepper get sluggish and very RAM intensive with large G-code files. I may take a swing at writing a standalone executable in the future. Mach3 doesn't support TinyG...

    Another thing that I would have done differently, is cut my spoiler board to a "sharper" corner for positioning (this would remove the need of the MDF offset).

    Finally, I would have waited for more end-mills to arrive in the mail. :) The smallest that I had on hand was 1/8". 1/16" or even 1mm would have made for some amazing detail. Maybe for round two in maple or walnut...

    Cheers,
    -Jamie
     
    Marmil and Giarc like this.
  28. jamesdjadams

    jamesdjadams Well-Known
    Builder

    Joined:
    Nov 1, 2016
    Messages:
    40
    Likes Received:
    48
    Stock... not stalk... lol!

    This:
    IMG_1792.JPG

    Not This:
    stalk-celery.jpg

    :duh: Oupps.
     
    Giarc and MaryD like this.
  29. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    Not a lot of OB parts, but the plates were cut with my OX! :) The project isn't completed yet, I'm still waiting for more parts to arrive
     

    Attached Files:

    alan richard and MaryD like this.
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice