A 250x250 mm Delta Printer utilizing a Duet Wifi controller and a Titan Aero direct drive extruder.

A little project for a rainy day which some, like me, may find useful.

A CNC platform designed with swapable heads to do laser engraving/etching/cutting, routing and milling, as well as 3D printing.

This is a simpel build of a Linear rail for the Dobot Magician.

Standard build with high Z using a Gauss probe instead of a router.

This is a brief overview of the build of my macro imaging slide.

All metal frame 500mm bed Delta 3D printer

Mag arm deltabot with laser cut carriages and connectors.

A custom Delta printer for large projects with any filament that still retains speed and accuracy, all within a 15 amp/110VAC power budget. Based on Johann's Mini Kossel design.

Delta printer, Bed size 280 cm dimeter Print Height 300 cm not tested yet the speed

Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.

A simple build that helps you to mount the OpenBuilds Interface to the front of your machine.

I saw a video of some one pouring resin in a mold,so i did a little research, i bought some resin,and some molds and magnets all from Amazon, it took me several tries and a big mess but it finally finished. The first pour i poured a small batch to make a templet,i marked all the holes that needed drilling then i marked the underside of the mold where i wanted the magnets, next was making the pcs i needed