A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.

A compact portable DIY camera slider for time lapse photography using a GoPro.

This is just a small project to get use to the OpenBuild products.

This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.

My take on a non affordable slider.

6 axis rig based on OpenBuild C-Beam and ESP32 MCU, WiFi controlled with custom app.

In order to make some nice traveling video you need a slider .

I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)

3d printed V-Slot Gantry Plate leveler.

This is a video were take a high level look at how I built up my version of a fully open source Motorized Camera Slider (OpenSlider)

A six axis camera slider with a 7th LIFT axis added!

I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.

Makerparts.ca MPro Camera Slider System

This system allows you to adjust the position of the microphone remotely

Build a manual camera slider.

X is 1000mm, Y is 1500 mm, Z is 1000mm. It Rotates 360 degrees and Tilt also can move 360 degrees. I also have a motor that controls the focus of the camera.