A six axis camera slider with a 7th LIFT axis added!

Makerparts.ca MPro Camera Slider System

6 axis rig based on OpenBuild C-Beam and ESP32 MCU, WiFi controlled with custom app.

This system allows you to adjust the position of the microphone remotely

My take on a non affordable slider.

I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)

This is a video were take a high level look at how I built up my version of a fully open source Motorized Camera Slider (OpenSlider)

Build a manual camera slider.

I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.

A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.

In order to make some nice traveling video you need a slider .

This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.

3d printed V-Slot Gantry Plate leveler.

A compact portable DIY camera slider for time lapse photography using a GoPro.

This is just a small project to get use to the OpenBuild products.