Build List
-
Active Filters:
uno
Build Author Retsaj Views 59998
Standalone Torch Height Controller for CNC Plasma Cutting
A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)
Build Author Hisha Views 8184
Sphinx XL/R7
A 1000mm x 1000mm Sphinx/R7 build.
Build Author David E. Flores E. Views 3129
ACRO System w/Laser 80W
This is my version of the OpenBuilds ACRO System CNC, a 1010 version (1000mm x 1000mm). I need this machine to build PCB prototypes within 2-days at maximum. I will try to build PCBs using drill and laser methods...
C-Beam unit with 400W Spindle
Standard (If there is one) C-Beam with plnth
Build Author Terone Burgenheim Views 2235
My CNC
This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.
Build Author David E. Flores E. Views 1126
DaveWare DrawBot
Turning my prototypes into real objects, it will be required a great amount of drawings, A LOT. Therefore, against the ink costs raise price push me to think in a way to draw models, blueprints, etc. at very, VERY low cost. This is where my DrawBot was born