OpenBuilds C-beam 15mm belt on 1500mm C-Beam.

This will be my first build ever! Looking forward to it , just gotta finish the new workshop first then I'm on it!

All metal frame 500mm bed Delta 3D printer

This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.

Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...

Bringing your lead screw precision and accuracy to new lengths using a simplistic tension system!

C-Beam Router using 1500mm lengths, 48x48" build area, and rack and pinion movement.

I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.